User Guide Nokia Bluetooth Stereo Headset BH-121 Issue 1 EN
User Guide Nokia Bluetooth Stereo Headset BH-121 Contents About your headset 3 Keys and parts 4 Charge your headset 5 Switch on your headset 6 Pair and connect your headset using NFC 7 About Bluetooth connectivity 8 Pair and connect your headset using Bluetooth Make and receive calls 9 10 Handle calls from 2 phones 11 Change the volume 12 Listen to music 13 Reset your headset 14 Restore factory settings 15 Troubleshooting and support 16 Product and safety information 17 Copyrig
About your headset With the Nokia Bluetooth Stereo Headset BH-121, you can turn any pair of headphones into a wireless headset. Just pair up the devices, plug in your headphones, and you're ready to go. If you have 2 phones, you can connect them both to the headset simultaneously. The noise-blocking in-ear headphones give you a clear and powerful sound, and 3 different sizes of earbuds help you find the perfect fit. © 2013 Nokia. All rights reserved.
Keys and parts Get to know your headset. 1 2 3 4 5 6 7 8 9 10 11 Battery indicator light Power key Bluetooth indicator light Rewind key Fast forward key Volume keys NFC area Multifunction key Carrying clip Audio connector (3.5 mm) Charger connector The surface of this product is nickel-free. © 2013 Nokia. All rights reserved.
Charge your headset Before using the headset, you must charge the battery. 1. Plug a compatible charger into a wall outlet, or connect your headset to a compatible computer with a USB cable. 2. Connect the micro-USB end of the cable to the charger connector on your headset. When the battery is fully charged, the red battery indicator light turns green. 3. Disconnect the charger from the headset, then from the wall outlet. When you unplug a charger, hold and pull the plug, not the cord. © 2013 Nokia.
Switch on your headset Switch on your headset to check the battery. Press and hold the power key for 2 seconds. If the battery is full, the battery indicator light flashes green once. If the indicator light flashes red fast, charge the battery. The headset automatically connects to the last connected device. If you have never paired your headset with a device, or you have cleared the pairings, pairing mode is activated. If the headset is not connected within 30 minutes, it switches off.
Pair and connect your headset using NFC If your phone supports Near Field Communication (NFC), it's easy to pair your headset. You can pair your headset with up to 8 devices. Tap the NFC area of the phone and the headset together. If the headset is switched off, it switches on before pairing. To reconnect to a previously paired device, tap the NFC areas together. You can connect to up to 2 devices at the same time. © 2013 Nokia. All rights reserved.
About Bluetooth connectivity You can use Bluetooth to make a wireless connection to other compatible devices, such as mobile phones. The devices don't have to be in direct line-of-sight, but they must be within 10 metres (33 feet) of each other. The connection may be affected by obstructions such as walls or other electronic devices. This device is compliant with Bluetooth Specification 3.0 supporting the following profiles: handsfree (1.6), headset (1.2), advanced audio distribution (1.
Pair and connect your headset using Bluetooth Before using the headset, you must pair and connect it with a compatible device. You can pair the headset with 8 devices. Make sure your headset is switched on. 1. To enter pairing mode, press and hold the power key for 2 seconds. The Bluetooth indicator light flashes quickly. 2. Switch on Bluetooth on your phone, and search for Bluetooth devices. 3. Select the headset from the list to pair your phone with it. 4. If necessary, type in the passcode 0000.
Make and receive calls You can use your headset in various ways for handling calls. Make sure your headset is on. 1. To make a call, use the phone. 2. To answer or end a call, press . Tip: If your headset is switched off and there's an incoming call on the phone you last connected the headset to, just switch on the headset to answer the call. 3. To reject an incoming call, press twice. 4. To make a call using voice dialling, press for 2 seconds. Voice dialling is only available when not in call.
Handle calls from 2 phones Make sure both phones are connected to your headset. Both phones must support Bluetooth handsfree profile. To switch on the multipoint feature, press and the volume up key for 2 seconds. To switch off the multipoint, press and the volume down key for 2 seconds. 1. To answer a waiting call and end the active call, press . 2. To answer or switch to a waiting call and put the active call on hold, press and hold 3. To end the active call and make the call on hold active, press . 4.
Change the volume When you need to, adjust the volume to your liking. Press the volume keys up or down during a call or when listening to music. © 2013 Nokia. All rights reserved.
Listen to music Like to move around while listening to music? With your headset, you can listen to music from your phone or computer. Pair and connect your headset to a compatible device that has a music player. 1. Select the song in the music player, and press . 2. To play the next song, press . 3. To play the previous song, press twice. 4. To scroll through the song quickly, press and hold 5. To pause playback, press . © 2013 Nokia. All rights reserved. or .
Reset your headset If you encounter problems, resetting your headset may help. Press and hold while connecting the headset to a charger. Resetting your headset preserves your pairings and other settings. © 2013 Nokia. All rights reserved.
Restore factory settings If you want to clear all the pairings and settings, restore your headset to the factory settings. 1. Make sure the headset is not connected to any devices. 2. Press and hold and the power key for 2 seconds. You hear a voice prompt, and the battery indicator light flashes green and red. © 2013 Nokia. All rights reserved.
Troubleshooting and support When you want to learn more about your device, or if you're unsure how your device should work, there are several support channels for you to check. To help you get the most out of your device, you can explore www.nokia.com/support.
Product and safety information Take care of your device Handle your device, battery, charger and accessories with care. The following suggestions help you keep your device operational. • • • • • • • • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that corrode electronic circuits. If your device gets wet, let the device dry. Do not use or store the device in dusty or dirty areas. Do not store the device in high temperatures.
Do not dismantle, cut, crush, bend, puncture, or otherwise damage the battery in any way. If a battery leaks, do not let liquid touch skin or eyes. If this happens, immediately flush the affected areas with water, or seek medical help. Do not modify, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids. Batteries may explode if damaged. Use the battery and charger for their intended purposes only.
© 2013 Nokia. All rights reserved.