User's Manual

ENGLISH
Pair and connect to two devices
To pair the headset with two devices,
switch off the headset, activate
pairing mode, and pair it with the first
device. Switch off the headset,
activate pairing mode, and pair it with
the second device.
To connect the headset to the two
devices, switch the headset off and
back on.
Handle calls
If the headset can connect to two
devices at the same time and you use
redialling or voice dialling, the call is
made on the device that you last used
to make a call when the headset was
connected to it.
To answer a call on one connected
device and end the active call on the
other device, press the answer/end
key.
To answer a call on one connected
device and put the active call on hold
on the other device, press and hold the
answer/end key for about 2 seconds.
To end the active call on one
connected device and make the call
on hold active on the other device,
press the answer/end key.
To switch between the active call on
one device and the call on hold on the
other device, press and hold the
answer/end key for about 2 seconds.
Activate or deactivate voice
prompts
Press and hold the answer/end key
while you remove the earpiece from
the slot, and continue to press and
hold the key for about 5 seconds. The
blue indicator light starts to flash
quickly. Press and hold the answer/end
key for about 8 seconds.