User's Manual

ENGLISH
Get started
The headset contains the following
parts shown on the title page: storage
slot with indicator light (1),
microphone (2), mute switch (3),
earpiece (4), clip (5), answer/end key
(6), and charger connector (7).
Before using the headset, you must
charge the battery and pair the
headset with a compatible device.
Parts of the device are magnetic. Metallic
materials may be attracted to the device.
Do not place credit cards or other
magnetic storage media near the device,
because information stored on them may
be erased.
Charge the battery
Before charging the battery, carefully
read “Battery and charger
information”.
1. Connect the charger to a wall
outlet.
2. Connect the charger cable to the
charger connector.
The red indicator light is displayed
during charging. Charging the
battery fully may take up to 2
hours.
3. When the battery is fully charged,
the green indicator light is
displayed. Disconnect the charger
from the headset, then from the
wall outlet.
When you unplug a charger, hold
and pull the plug, not the cord.
The fully charged battery has power
for up to 8 hours of talk time. When
you keep the earpiece in the storage
slot, the fully charged battery has
power for up to 3 months of standby
time. When you do not keep the
earpiece in the slot, the standby time
is up to 150 hours.