User's Manual

ENGLISH
To check the battery charge when the
headset is not connected to a charger,
press the answer/end key when the
headset is connected to a mobile
device. If the indicator light is green,
the charge level is sufficient. If the
light is yellow, you may need to
recharge the battery soon. If the light
is red, recharge the battery.
When the battery charge is low, the
headset beeps every 5 minutes, the
red indicator light flashes, and if voice
prompts are activated, there is an
audible notification. If voice prompts
are activated, there is also an audible
notification when the battery is
completely discharged.
Switch the headset on
Remove the earpiece from the storage
slot. The headset beeps, and the green
indicator light flashes slowly while the
headset tries to connect to the last or
two last connected devices.
When the headset is connected to at
least one device and is ready for use,
the blue indicator light flashes slowly.
If the headset has not been paired
with a device, it automatically enters
pairing mode.
Switch the headset off
Place the earpiece into the storage
slot. The headset beeps, and the red
indicator light is briefly displayed.
If the headset is not connected to a
device within about 30 minutes, it
switches off automatically.
Pair and connect the headset
Before using the headset, you must
pair and connect it to a compatible
device.
You can pair the headset with up to
eight devices, but you can connect it
to a maximum of two devices at a
time.