User Manual

ENGLISH
To connect the headset to the two
devices, switch the headset off and
back on.
Handle calls
If the headset can connect to two
devices at the same time and you use
redialling or voice dialling, the call is
made on the device that you last used
to make a call when the headset was
connected to it.
To answer a call on one connected
device and end the active call on the
other device, press the multifunction
key.
To answer a call on one connected
device and put the active call on hold
on the other device, press and hold the
multifunction key for about 2 seconds.
To end the active call on one
connected device and make the call
on hold active on the other device,
press the multifunction key.
To switch between the active call on
one device and the call on hold on the
other device, press and hold the
multifunction key for about 2 seconds.
Clear pairings
To clear the pairings from the headset,
switch off the headset, and press and
hold the multifunction key for about 8
seconds. The headset beeps twice, the
red and green indicator lights
alternate, and the headset enters
pairing mode.
Troubleshooting
If you cannot connect the headset to
your compatible device, check that
the headset is charged, switched on,
and paired with the device.