User Manual

ENGLISH
Activate or deactivate vibration
You can set the headset to vibrate and
flash the indicator light when you
receive a call.
By default, the vibration and the
indicator light are activated. To
deactivate the vibration and the light,
press and hold the answer/end key
and the volume down key for about 5
seconds when the headset is
connected to a device.
To activate the vibration and the light,
press and hold the answer/end key
and the volume up key for about 5
seconds.
Use the headset with two
connected devices
You can connect the headset to two
devices at the same time.
To pair the headset to a second device,
see “Pair and connect the headset”.
Allow connection to two devices
By default, the headset can only be
connected to one device at a time. To
allow the headset to connect to two
devices, switch off the headset, and
press and hold the power key and the
volume up key for about 5 seconds.
The green indicator light flashes once.
To allow the headset to connect to
only one device, switch off the
headset, and press and hold the power
key and the volume down key for
about 5 seconds. The yellow indicator
light flashes once.
Handle calls
If the headset can connect to two
devices at the same time and you use
redialling or voice dialling, the call is
made on the device that you last used
to make a call when the headset was
connected to it.