User Manual

ENGLISH
To answer a call on the second
connected device and end the active
call on the first device, press the
answer/end key.
To answer a call on the second
connected device and put the active
call on hold on the first device, press
and hold the answer/end key for about
2 seconds.
To end the active call on the second
connected device and make the call
on hold active on the first device,
press the answer/end key.
To switch between the active call on
second device and the call on hold on
the first device, press and hold the
answer/end key for about 2 seconds.
Clear settings or reset
To clear all the settings from the
headset, switch off the headset, and
press and hold the power key and the
answer/end key at the same time for
about 8 seconds. The headset beeps
twice, and the red and green indicator
lights alternate. After the settings are
cleared, the headset enters pairing
mode.
To reset the headset if it stops
functioning, even though it is charged,
connect the headset to a charger
while you press and hold the power
key.
Troubleshooting
If you cannot connect the headset to
your compatible device, check that
the headset is charged, switched on,
and paired with the device.