User Manual

ENGLISH
feature with the headset), when no
call is in progress, press the answer/
end key twice.
To activate voice dialling (if your
mobile device supports this feature
with the headset), when no call is in
progress, press and hold the answer/
end key for about 2 seconds. Proceed
as described in the user guide of the
mobile device.
To answer or end a call, press the
answer/end key. To reject a call, press
this key twice.
To mute the microphone during a call,
slide the mute key towards the
microphone. To unmute, slide the key
to the opposite direction.
To switch a call between the headset
and a compatible connected device,
press and hold the answer/end key for
about 2 seconds.
Manage two calls
To manage two calls with the headset
at the same time, your mobile device
must support the Bluetooth Hands-
Free Profile 1.5, and call waiting must
be activated in the device. Call
waiting is a network service and is
available when the headset is
connected to only one device.
To answer a waiting call and end the
active call, press the answer/end key.
To answer a waiting call and put the
active call on hold, press and hold the
answer/end key for about 2 seconds.
To end the active call and make the
call on hold active, press the answer/
end key.
To switch between the active call and
the call on hold, press and hold the
answer/end key for about 2 seconds.