User's Manual

ENGLISH
Activate or deactivate lights
By default, the indicator lights are
used in all situations. To deactivate
the lights in some situations (for
example, during a call or when the
speakerphone is connected to a
mobile device), press and hold the
answer/end key and the volume down
key for about 5 seconds when the
speakerphone is connected to a
device. The speakerphone beeps, and
the yellow indicator light flashes once.
To activate the lights, press and hold
the answer/end key and the volume up
key for about 5 seconds. The
speakerphone beeps, and the green
indicator light flashes once.
Clear settings or reset
To clear the pairing settings from the
speakerphone, switch off the
speakerphone, and press and hold the
power key and the answer/end key at
the same time for over 8 seconds.
When the settings are cleared, the red
and green indicator lights alternate.
To reset the speakerphone if it stops
functioning, even though it is charged,
connect the speakerphone to a
charger while you press and hold the
power key.
Troubleshooting
If you cannot connect the
speakerphone to your compatible
device, check that the speakerphone is
charged, switched on, and paired with
your device.
9223070_en1_KESKEN.fm Page 12 Thursday, July 8, 2010 12:23 PM