User's Manual

ENGLISH
light flashes slowly while the
speakerphone tries to connect to the
last used device. When the
speakerphone is connected to your
device and is ready for use, the blue
indicator light flashes slowly. If the
speakerphone has not been paired
with a device, it automatically enters
pairing mode.
To switch off, press the power key. The
speakerphone beeps, and the red
indicator light is briefly displayed. If
the speakerphone is not connected to
a device within about 30 minutes, it
switches off automatically.
Pair and connect
Before using the speakerphone, you
must pair and connect it to a
compatible device.
You can pair the speakerphone with
up to 8 devices, but connect it to only
one device at a time.
1. Make sure your mobile device is
switched on.
2. If you have not previously paired
the speakerphone with a device,
switch on the speakerphone. The
speakerphone enters pairing mode,
and the blue indicator light starts
to flash quickly.
If you have previously paired the
speakerphone with a device, make
sure the Bluetooth function is
deactivated in the current device
or the device is not within 10
metres (33 feet) of the
speakerphone. Then switch off the
speakerphone, and switch it on
again.
3. Within about 3 minutes, activate
the Bluetooth feature on your
device, and set the device to search
for Bluetooth devices. See the user
guide of your device for
instructions.
9223070_en1_KESKEN.fm Page 8 Thursday, July 8, 2010 12:23 PM