Operator`s manual

Page 96 PROGRAMMER'S GUIDE
C
YBER
A
MP
380, COPYRIGHT MARCH 2002, AXON INSTRUMENTS, INC.
Libraries and Example Code
The contents of the CD distributed with the CyberAmp 380 includes:
1) The DOS command-line control program CMD300.EXE.
2) The spreadsheet control program Quick300.EXE.
3) All of the source and information files necessary to compile CMD300.EXE and Quick300.EXE.
4) Communications libraries written in both QuickBASIC and C.
These source files and libraries are not copyrighted. The libraries are for use by owners of the
CyberAmp 380 or by third-party vendors of data acquisition software. The source code for CMD300
is made available as a guide to how applications can use the libraries.
CyberAmp 380 Command Set  Summary
Command Function
C Input Coupling
D DC offset
E EEPROM read/write/verify/serial#
F Frequency of low-pass filter
G Gain
L Load factory defaults
N Notch filter
O Overload report and reset
R Return specified number of "A" characters to the host
S Status report
T Test oscillators
V Verify internal circuitry
W Write settings to main memory
Z Zero out the
DC content of the signal