User's Manual

Chapter 2: Setup 11
5. When the wizard asks which network adapter you are setting up, click
Wireless-G Notebook Adapter (MN-720, MN-820) or Wireless-G USB 2.0
Adapter (MN-710) depending on which adapter you are installing.
6. Continue following the instructions in the Setup Wizard. If you have a question,
click a Help link on the screen for more information.
If you need to cancel setup before it is complete, you can rerun the wizard.
When the Setup Wizard restarts, click Set Up a Product.
Step 3: Insert the Adapter into Your Computer
When the Setup Wizard prompts you to connect your wireless adapter, do one of
the following:
O
If you have a Notebook adapter, insert it into the PC Card slot on your computer.
O
If you have a USB adapter, connect the adapter cable to an available USB port
on your computer. If you don’t have an available USB port on your computer,
you can connect the adapter to a USB hub that has its own power supply cord.
Although some keyboards and monitors have USB ports, they typically do not
provide enough power to support the adapter.
Note Leave your computer turned on while you insert your adapter.
X1026439_CH2.indd 11/19/2003, 8:36 AM11