User Manual Part 3

• Allow multimedia reception. Choose No, Yes, or In home network to use

multimedia service. If you choose In home network, you cannot receive

multimedia messages when outside your home network.

• Incoming multimedia messages. Select Retrieve to set the phone to

automatically fetch newly received multimedia messages, or select

Decline if you do not wish to receive multimedia messages.

• Connection settings. Define WAP connection settings for retrieving

multimedia messages. Activate the set where you want to save the

connection settings and then edit the settings.

• Settings' name. Key in the new name for the connection set and press

OK.

• Homepage. Key in the homepage address of the WAP service that you

want to use and press OK.

• Session mode. Select Permanent or Temporary.

• Data bearer. Select GPRS.

• Bearer settings.

• GPRS access point. Key in the access point name and press OK. An

access point name is needed to establish a connection to a GPRS

network. You obtain the access point name from your network

operator or service provider.

• IP address. Key in the address and press OK. You obtain the IP

address from your network operator or service provider.