User Manual

)&&'5$)7   Copyright © Nokia 2003
If you are prompted to supply a voice mailbox number, key it in and select OK. See also
“Voice messages” on page 44.
Speed dial a phone number
Before you can use speed dialing you need to assign speed dial numbers. For more
information, see
“Speed dial” on page 57.
If Speed dialing is set to off, press the speed dialing number and then press the Send key.
If Speed dialing is set to on, press and hold a speed dialing key until the call is started.
Note: To activate speed dialing, select Menu > Settings > More Settings > Call
settings > Speed dialing > On.
• ANSWER OR REJECT AN INCOMING CALL
Press the Send key to answer an incoming call, and press the End key to end the call.
Press the End key to reject an incoming call.
If you select Silence, only the ringing tone is muted. Then, either answer or reject the call.
If a compatible headset with the headset key is connected to the phone, you can answer
and end a call by pressing the headset key.
If the Divert if busy function has been activated to divert the calls, for example to your
voice mailbox, rejecting an incoming call will also divert the call. See
“Call settings” on
page 67
Caller ID
When there is an incoming call, the phone shows the caller’s name, phone number, or the
text Private number or Call.
If more than one name is found in Contacts with the same seven last digits of the phone
number as the caller’s number, only the phone number will be displayed (if it is available).
If the caller’s number has not been saved in Contacts, but there is another name saved with
the same seven last digits in the phone number as in the phone number of the caller, the
phone may display an incorrect name.
Call waiting
During a call, press the Send key to answer the waiting call. The first call is put on hold.
Press the End
key to end the active call.
To activate call waiting, see “Call settings” on page 67.
6820.ENv1_9310322.book Page 24 Wednesday, October 15, 2003 1:43 PM