User's Manual
Table Of Contents
- Nokia 3585 Phone at a glance
- Quick guide to functions
- For your safety
- SWITCH OFF WHERE PROHIBITED
- ROAD SAFETY COMES FIRST
- INTERFERENCE
- SWITCH OFF IN HOSPITALS
- SWITCH OFF IN AIRCRAFT
- SWITCH OFF WHEN REFUELING
- SWITCH OFF NEAR BLASTING
- USE SENSIBLY
- QUALIFIED SERVICE
- ACCESSORIES AND BATTERIES
- WATER-RESISTANCE
- BACKUP COPIES
- CONNECTING TO OTHER DEVICES
- INFRARED PRECAUTIONS
- CALLING
- EMERGENCY CALLS
- • Menu shortcuts
- 1 Welcome
- 2 About your phone
- • Your Nokia phone
- • About the antennas
- • About the battery
- Install the battery
- 1 Remove the back cover of the phone by gripping the bottom of the phone between thumb and index ...
- 2 Place the battery in the compartment with the label side facing up and the metal contacts align...
- 3 Slide the battery into place and snap the top of the battery in so that the retainer bar comes ...
- 4 Replace the cover by sliding it upward until you hear a click.
- Charge the battery
- Remove the battery
- Important battery information
- Prolong battery life
- Install the battery
- • Switch your phone on or off
- • Check the Start screen
- • Learn about the keys
- • Make and answer calls
- • Review phone symbols
- • Use the selection keys
- • View your phone’s help system
- • Browse phone menus
- • Menu and menu shortcuts
- Messages 1
- Call log 2
- Profiles 3
- Settings 4
- System 5
- Games 6
- Voice 7
- Minibrowser 8
- Mobile link 9
- Organizer 10
- • Phone book menu
- 3 Phone setup
- 4 Text entry
- 5 Phone book
- • Saving names and numbers
- • Recall names and numbers
- • Use phone book menus
- • Edit a name or number
- • Add a number to a phone book entry
- • Erase stored names and numbers
- • Add other information to a phone book entry
- 1 Recall the phone book entry you want to modify.
- 2 Press Details, then press Options again.
- 3 Scroll to Add info, then press Select.
- 4 Scroll to the type of information you would like to add (E-mail, Street addr., etc.), then pres...
- 5 Enter the information, then press OK.
- 6 Press to return to the Start screen.
- ADD INFO ON COPYING ENTRIES FROM PHONE BOOK TO SIM
- • Use caller groups
- • Check memory status
- 6 Call log
- Requirements
- • Check missed, received, or dialed calls
- • Clear call lists
- • Use call timers
- • Turn on a current call timer
- • Clear call timers
- • Data timers (Data/fax and Minibrowser)
- 7 Voice mailbox
- 8 Text messages
- ADD INFO ON MMS
- • Write a text message
- Create and send a text message
- 1 From the Start screen, press Menu, then press Select.
- 2 Select Text messages, then select Write message.
- 3 Select either Text (up to 160 characters) or Page (message consists of phone number only).
- 4 Scroll to Add number, then press Select.
- 5 Enter the phone number of the recipient, then press OK. OR Press Search, highlight the desired ...
- 6 Press Options, scroll to Enter text, then press Select.
- 7 Enter your message.
- 8 To send the message, press Options, then select Send.
- Use other options
- View message options
- Create and send a text message
- • Use message templates
- 1 Create a new text message as described in steps 1 - 6 in the section, “Create and send a text m...
- 2 Instead of entering your own message, press Options, scroll to Use template, then press Select.
- 3 Scroll to one of the available templates:
- 4 Press Select to enter the text into your new message.
- 5 Complete the process described earlier to send your message.
- 1 Press Menu 01-1-5 (Messages > Text messages > Templates).
- 2 Scroll to the desired template, then press Select.
- 3 Press Options, then select Edit message to modify the message or Add number to select a recipient.
- 4 From the message options list, select Send to send your message.
- • Learn about e-mail text messages
- • Picture messages
- Download pictures
- When you receive a picture message
- 1 Press Show to read the message (or press Exit to view the message later from your Inbox).
- 2 If you have more than one message, scroll to the message of your choice and press Select to vie...
- 3 Use the scroll keys to view the whole message if necessary.
- 4 Once you’re finished, press Back to move the message to the Inbox, or press Options for other c...
- To save the picture
- Compose and send a picture message
- 1 Follow steps 1 - 6 on page60, “Create and send a text message”.
- 2 At the text entry screen, press Options. Scroll to Attach picture and press Select.
- 3 Scroll to a picture and press View.
- 4 Press Attach to insert the picture into your message (or press Back, scroll to another picture,...
- 5 Once the picture is attached, enter the text of your message.
- 6 To send the picture message, press Options, scroll to Send, and press Select.
- Preview, change, or erase a picture message
- 1 After a picture has been attached to your message, press Options at the message edit screen.
- 2 Scroll to one of the following options and press Select.
- a) Preview - Previews the attached message before sending. Press Back to return to the list of op...
- b) Change picture - Takes you back to the picture list. Scroll to highlight a new picture, press ...
- c) Erase picture - Press OK to erase the picture from your message, or press Back to return to th...
- • Receive text messages
- • Respond to a text message
- • Reply to a message
- • Erase messages
- • Message settings
- • Organize text messages using folders
- 9 Personalization
- • Learn about profiles
- • Select a different profile
- • Customize a profile
- • Rename profiles
- • Download a ringing tone
- • Set the display language
- • Set the clock
- • Customize the Welcome screen
- • Learn about voice commands
- 10 Advanced features
- • View in-call options
- • Use call forwarding
- Learn about call forwarding feature codes
- Store a feature code
- 1 Press Menu 4-6-5 (Settings > Network services > Network feature setting). The Feature code fiel...
- 2 Enter the feature code your service provider gave you (example *90 for activating Forward if bu...
- 3 Press Select when Call forwarding is displayed.
- 4 Scroll to the type of forwarding that matches the feature code you entered (example: Forward if...
- 5 Select Activate.
- Activate/cancel call forwarding
- • Use call waiting
- • Make a conference call
- 1 Make a call to the first participant as usual. When you’re ready to place a call to the next pa...
- 2 Press Options, then press New call.
- 3 Enter the number and press (or press Search to recall the number from the phone book).
- 4 Press again to connect both parties.
- 5 To end the call, press . This action disconnects both parties.
- End calls
- Disconnect second party
- Disconnect first party
- • Send own caller ID with next call
- • Use Automatic redial
- • Calling card
- Saving calling card information
- 1 Press Menu 4-1-6 (Settings > Call settings > Calling card).
- 2 Enter your security code, then press OK.
- 3 Scroll to one of the four memory locations, then press Options.
- 4 Scroll to Edit, then press OK.
- 5 Select Dialing sequence. Scroll to one of the three sequence types as described in the followin...
- 6 Enter the required information (access number or prefix and card number). Press OK to confirm y...
- 7 Press OK to save your changes.
- 8 Scroll to Card name, then press Select. Enter the card name, then press OK.
- Choosing a calling card to use
- Making calling card calls
- 1 Enter the phone number, including any prefix (such as 0 or 1) that your calling card may requir...
- 2 Press and hold for a few seconds until your phone displays Card call.
- 3 Your phone displays Wait for tone, then press OK. When you hear the tone or system message, pre...
- 4 Your phone displays Wait for tone, press OK again. When you hear the tone or system message, pr...
- Saving calling card information
- • Voice dialing
- Assign a voice tag to a phone number
- Add a voice tag to a phone book entry
- 1 At the Start screen, press or . Scroll to the desired phone book entry, and press Select.
- 2 Scroll to the phone number you want to tag and press Options.
- 3 Scroll to Add voice tag and press Select. (The phone displays Press Start, then speak after the...
- 4 Press Start and after the tone, speak the voice tag clearly into the phone’s microphone.
- Important notes about voice tags
- Add a voice tag to a phone book entry
- Dialing a number using voice dialing
- Work with voice tags
- Assign a voice tag to a phone number
- • 1touch dialing
- Set up 1-touch dialing
- 1 Press Names.
- 2 Scroll to 1touch dialing and press Select.
- 3 Scroll to the desired number key (keys 2 through 9), and press Assign.
- 4 Enter the phone number manually, or press Search to locate a phone book entry.
- 5 Select the desired name or entry from the phone book. If more than one number is stored for tha...
- 1-touch dialing options
- Set up 1-touch dialing
- • Learn about Caller Groups
- • Use Touch tones
- • Link phone book entries
- Use linking options
- 1 Store the touch tone string into your phone book.
- 2 Assign the phone book entry with the touch tones to a one-touch dialing location (example: loca...
- 3 Edit the automated service’s phone number by adding +n to the end of the phone number (where n ...
- 4 Press OK to save your changes.
- 5 Dial the automated service’s number from your phone book. Your phone automatically sends the to...
- Use linking options
- • Learn about Voice Recorder
- 11 Security and System settings
- • Lock keypad (Keyguard)
- • Security code
- • add INFO ON PUK, PUK2 CODES
- • Phone lock
- • Call restrictions
- Learn about restriction options
- Adding a call restrictions
- 1 Press Menu 4-5-1 (Settings > Security settings > Call restrictions).
- 2 Enter the security code and press OK.
- 3 Select either Restrict outgoing calls or Restrict incoming calls.
- 4 Scroll to Add restriction and press Select.
- 5 Enter the number string you wish to restrict and press OK. For example:
- 6 Enter a name to identify this restriction, or just press OK.
- Select call restrictions
- 1 Press Menu 4-5-1 (Settings > Security settings > Restrict calls).
- 2 Enter your security code and press OK.
- 3 Scroll to Restrict outgoing calls or Restrict incoming calls and press Select.
- 4 Scroll to Select and press Select.
- 5 Scroll to each restriction you wish to use and press Mark; press Unmark to deactivate existing ...
- 6 Press Done, then press Yes to save the changes you’ve made.
- Edit call restrictions
- 1 Press Menu 4-5-2 (Settings > Security settings > Restrict calls).
- 2 Enter your security code and press OK.
- 3 Scroll to Restrict outgoing calls or Restrict incoming calls and press Select.
- 4 Scroll to Edit and press Select.
- 5 Scroll to the restriction you wish to edit, then press Select.
- 6 Edit the number (as needed), then press OK.
- 7 Edit name (as needed), then press OK.
- Erasing call restrictions
- 1 Press Menu 4-5-1 (Settings - Security settings - Restrict calls).
- 2 Enter your security code and press OK.
- 3 Scroll to Restrict outgoing calls or Restrict incoming calls and press Select.
- 4 Scroll to Erase and press Select.
- 5 Scroll to the restriction you wish to erase, then press OK.
- 6 Press OK again to erase restriction.
- • Automatic update of service
- • Learn about system selection
- 12 Organizer
- • Use the alarm clock
- • Calendar
- • Calculator
- Use the calculator
- 1 From the Organizer menu, scroll to Calculator, and press Select.
- 2 Enter the first number in the calculation (press for decimal point).
- 3 To add, press once (+ appears); to subtract, press twice ( ); to multiply, press three times ...
- 4 You can also press Options, scroll to Add, Subtract, Multiply, Divide, Square, or Square root, ...
- 5 Enter the second number. Repeat steps three and four as many times as necessary.
- 6 For a total, press Options twice.
- 7 To start a new calculation, press and hold Clear for two seconds.
- Use the calculator
- • Stopwatch
- 13. Games
- 14 Your phone and other devices
- 15 Minibrowser
- • Understand browsing sessions and indicators
- • Launching the minibrowser
- • Minibrowser menu
- • Navigate in the minibrowser
- • Links
- • Bookmarks
- • Receive messages via the minibrowser
- • End the minibrowser session
- • Disable minibrowser confirmations
- 16 Reference information
- 17 Nokia One Year Limited Warranty
- 1 The limited warranty for the Product extends for ONE (1) year beginning on the date of the purc...
- 2 The limited warranty extends only to the original purchaser (“Consumer”) of the Product and is ...
- 3 The limited warranty extends only to Consumers who purchase the Product in the United States of...
- 4 During the limited warranty period, Nokia will repair, or replace, at Nokia’s sole option, any ...
- 5 Upon request from Nokia, the Consumer must prove the date of the original purchase of the Produ...
- 6 The Consumer shall bear the cost of shipping the Product to Nokia in Melbourne, Florida. Nokia ...
- 7 The Consumer shall have no coverage or benefits under this limited warranty if any of the follo...
- b) The Product has been damaged from external causes such as collision with an object, or from fi...
- c) Nokia was not advised in writing by the Consumer of the alleged defect or malfunction of the P...
- d) The Product serial number plate or the accessory data code has been removed, defaced or altered.
- e) The defect or damage was caused by the defective function of the cellular system or by inadequ...
- b) If “a” is not convenient because of distance (more than 50 miles) or for other good cause, the...
- c) The Consumer shall include a return address, daytime phone number and/or fax number, complete ...
- d) The Consumer will be billed for any parts or labor charges not covered by this limited warrant...
- e) Nokia will repair the Product under the limited warranty within 30 days after receipt of the P...
- f) If the Product is returned during the limited warranty period, but the problem with the Produc...
- 9 YOU (THE CONSUMER) UNDERSTAND THAT THE PRODUCT MAY CONSIST OF REFURBISHED EQUIPMENT THAT CONTAI...
- 10 ANY IMPLIED WARRANTY OF MERCHANTABILITY, OR FITNESS FOR A PARTICULAR PURPOSE OR USE, SHALL BE ...
- 11 Some states do not allow limitation of how long an implied warranty lasts, so the one year war...
- 12 Nokia neither assumes nor authorizes any authorized service center or any other person or enti...
- 13 This is the entire warranty between the Nokia and the Consumer, and supersedes all prior and c...
- 14 This limited warranty allocates the risk of failure of the Product between the Consumer and No...
- 15 Any action or lawsuit for breach of warranty must be commenced within eighteen (18) months fol...
- 16 Questions concerning this limited warranty may be directed to: Nokia Inc. Attn: Customer Servi...
- 17 The limited warranty period for Nokia supplied attachments and accessories is specifically def...
- Appendix A: A message from the CTIA
- A Guide to Safe and Responsible Wireless Phone Use
- 1 Get to know your wireless phone and its features such as speed dial and redial. Carefully read ...
- 2 When available, use a hands free device. A number of hands free wireless phone accessories are ...
- 3 Position your wireless phone within easy reach. Make sure you place your wireless phone within ...
- 4 Suspend conversations during hazardous driving conditions or situations. Let the person you are...
- 5 Do not take notes or look up phone numbers while driving. If you are reading an address book or...
- 6 Dial sensibly and assess the traffic; if possible, place calls when you are not moving or befor...
- 7 Do not engage in stressful or emotional conversations that may be distracting. Stressful or emo...
- 8 Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you ...
- 9 Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfe...
- 10 Call roadside assistance or a special wireless non-emergency assistance number when necessary....
- A Guide to Safe and Responsible Wireless Phone Use
- Appendix B: A message from the FDA
5
[ 50 ]
• USE CALLER GROUPS
Your phone allows you to group phone book entries with similar attributes
into caller groups. The five default caller groups are Family, VIP, Friends,
Business, and Other. Each group has three attributes which can be
defined by the user: Group Name, Group Tone, and Group Logo.
Assign phone number to a caller group
1 Recall the desired phone book entry, then press Details.
2 Scroll to the desired phone number, then press Options.
3 Scroll to Caller groups, then press Select.
4 Scroll to the desired caller group (for example Family), then press
Select.
Edit caller group options
You can edit various aspects of a caller group.
SETTING A RINGING TONE AND GRAPHIC FOR A CALLER GROUP
1 Press Names.
2 Scroll to Caller groups and press Select.
3 Scroll to one of the caller groups and press Select.
4 Scroll to one of the following functions and press Select.
• Rename group - Enter the new name for the caller group and
press OK.
• Group ringing tone - Scroll to the desired tone and press OK.
Default is the tone selected for the currently selected profile.
• Group logo - Scroll to On, Off, View, or Send graphic (sent via
SMS), and press Select.
• Group members - Press Select to view group members. To add or
remove a member, press Options, then select Add name or
Remove name.