User Manual

DRAFT
[ 126 ]
• AUDIBLE ALERTS
Audible alerts provide you with the current signal bar or battery bar
strength of your phone.
Note: In order to obtain audible alerts, the alerts must first be set
up as voice commands. To set up voice commands, see “View
available functions” on page 124 and “Add a voice tag for the
command” on page 125.
Set up audible alerts
1 If you have the optional headset attached, press and hold the headset
button.
OR
• Press and hold Contacts.
OR
• Press and hold the volume down key.
2 When Please speak now appears, pronounce the voice tag clearly into
the microphone. When the phone finds the tag, Found appears, and
the phone plays the recognized voice tag from the phone memory
through the earpiece.
The phone then beeps, according to the strengths indicated in the
following table (and according to which voice command has been
activated):
Audible Alert One Beep Two Beeps Three beeps Four Beeps
Battery Bar
Strength
Low Half-full Almost full Full
Signal Bar
Strength
Weak Somewhat
strong
Almost
strong
Strong