User Manual

DRAFT
[ 127 ]
Menu functions
Connectivity (Menu 12)
You can make a serial connection between your
phone and a PC using the DKU-5 data cable, which
is available for purchase as an enhancement. Once
you establish this connection, you can access phone
information from your PC, or use your phone as a
wireless modem. It may also be possible to make this same serial
connection between your phone and an Infrared-equipped laptop or IR-
equipped desktop PC using the infrared port of your phone.
Note: Your phone must be switched on to use this function. Do
not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.
•INFRARED
You can set up the phone to receive data through its infrared (IR) port. To
use an IR connection, transmission and reception must be to or from an
infrared compatible phone or device. You can send or receive data such as
business cards and calendar notes to or from a compatible phone or data
device (such as a computer) through the IR port of your phone.
Important: Do not point the IR (infrared) beam at anyone's eye or
allow it to interfere with other IR devices.
SEND AND RECEIVE DATA USING IR
• Ensure that the IR ports of the
sending and receiving devices are
pointing at each other and that there
are no obstructions between the
devices. The preferable distance
between the two devices in an
infrared connection is from 3 inches
to 3 feet.
3 ft. maximum
distance