User Manual

DRAFT
[ 130 ]
Set up an automatic connection
Some service providers may have customized the options on the Services
menu. Contact your service provider for more information if the options
shown here are not available.
Important: (E)GPRS may not be available in all wireless networks.
The establishment and continuation of a (E)GPRS and Internet
connection depends on network availability, service provider
support, and signal strength.
You can choose one of the following options for your (E)GPRS connection.
1 At the Start screen, press Menu 12-2-1 (Connectivity > GPRS >
GPRS connection). After a brief pause, the following options appear
in the display.
2 Scroll to an option and press Select to activate the option.
• When needed—the (E)GPRS connection is established when you use
the xHTML browser and is closed when you exit the xHTML browser.
• Always online—the phone is automatically registered to a (E)GPRS
network when you turn your phone on. When you use the xHTML
browser, the connection between your phone and the network is
created and data transfer is possible. When you exit the xHTML
browser, the (E)GPRS connection ends but the registration to the
(E)GPRS network remains.
Appears in the upper left corner of the screen. Indicates you
are registered to a (E)GPRS network but the (E)GPRS
connection is not currently active.
Indicates that circuit switched (CS) or voice calls are not
possible when using (E)GPRS.
Indicates that the (E)GPRS connection has been interrupted
by a voice call.