User Manual

DRAFT
[ 70 ]
Tip: Save yourself the trouble of entering the mailbox codes each
time you dial voice mail. See “Automate voice mail” later in this
section for more information.
Call and setup your voice mail
1 Once you have saved the voice mailbox number, press and hold
1
.
2 When you connect to voice mail and the prerecorded greeting begins,
follow the service’s automated instructions to setup your voice mail.
Listen to your voice messages
Once you have setup voice mail, you can dial the number in one of four
ways:
• Dial the number using the keypad.
• Press and hold
1
.
•Press Listen if there’s a notification message in the display.
•Press Menu 01-3-1 (Messages > Voice messages > Listen to
voice messages). After a brief pause, your phone dials the voice
mail number.
Once you connect and the prerecorded greeting begins, follow the
automated instructions to listen to your voice messages.
Automate voice mail
You can insert special characters called “dialing codes” into phone numbers
such as voice mail and then save the number to a 1-touch dialing
location. Dialing codes instruct the receiving system to pause, wait,
bypass, or accept the numbers that follow them in the dialing string.
Note: Each voice mail service can vary. The examples and steps
that follow are for clarification. Check with your wireless provider
if you have specific questions about your voice mail service.