User's Guide

19
Note: The phone will not work in analog mode while searching
for digital service.
Checking signal strength
When at the start screen (see page 14) or in a
call, the strength of the radio signal is
indicated by the signal indicators on the left
side of your phone’s display. These indicators
will move up as the strength of the signal
increases and down as it decreases.
Increasing your phone’s signal may be easy. Try moving
your phone slightly, or move towards a window if you’re
calling from inside a building.
Making a call
Your cellular phone does not have a dial tone. Simply
enter the phone number (including area code, as needed)
and press
Note: NORMAL POSITION: Hold the phone as you would any
other telephone with the antenna pointed up and over your
shoulder.
Editing a number on display
If you make a mistake while entering a number to dial,
press s to move the cursor to the left and t to move it to
the right. Press Clear to delete the character to the left
of the cursor.
Dialing a phone number stored in the phone book
View stored names and numbers by pressing t or s from
the start screen (see page12), then press
Calling card calls
Note: See “Calling card” on page32.
Emergency calls
Note: See “Emergency calls” on page40.