User's Guide

32
(see “Network feature setting” on page53)
5. Once the feature code has been confirmed, the feature is
activated.
Caller ID
This is a network service that helps identify incoming calls.
Contact your service provider for details.
When Caller ID is active, your phone may display the caller’s
phone number. The caller’s name may also display if their
name and number has been stored in the phone book or if the
wireless network supports it.
Call or Call-caller ID unavailable will display when the
wireless network doesn’t recognize the calling number. Also,
Call-caller ID blocked may display if the calling party has
blocked caller ID.
Note: If you have stored a number more than once in your phone book,
and that number is stored each time with a different name, then a name
will not appear when someone calls from that number.
Note: See “Phone book” on page56 for details on your phone book.
Calling card
If you wish to use a calling card for long
distance calls, you must first store your
calling card information into your phone.
Your phone can store up to four calling
cards.
Storing a calling card
1. Press Menu 4-1-3 (Settings - Call settings - Calling
card)
2. Press t or s to desired calling card, press Options
3. Press t or s to Edit, press OK
4. Enter security code and press OK
Note: See “Security code” on page67 for details on your phone’s
security code.
5. Press Select at the Dialing sequence prompt. Use the