User's Guide

54
provider or dealer gives you a separate feature code to
activate each service. Deactivation codes are used to
deactivate each service.
Once you store the appropriate code in your phone, the
service appears as a menu item. You can then use the
menu to activate and deactivate these services.
Note: These feature codes may already be stored in your phone
by your service provider. Check with your service provider to
confirm if these codes are already configured in your phone.
Note: If your phone has more than one phone number
programmed, any feature codes stored will apply only to your
primary phone number, or NAM 1.
Storing feature codes
1. Press Menu 4-4-4 (Settings - Network services -
Network feature setting)
2. At Feature code:, enter the feature code or deacti-
vation code received from your dealer (e.g. ∗74,
∗740, etc.), press OK
3. t to the service that the code applies to and press
Select
4. t to suboption, then Select (Repeat step as required,
based on number of suboptions)
(Use step four only for call forwarding options)
5. t to Activate or Cancel, then press OK
Network services
Some of the features in this menu are network services
that require a subscription. See your service provider for
details and availability.
4-4-1 Call forwarding * - See page28.
4-4-2 Call waiting * - See page31.
4-4-3 Send own caller ID with next call * -
See page68.
4-4-4 Network feature setting - See page53.