ATTACHMENT M – USER’S MANUAL © 2001 PCTEST Lab
User Guide Nokia 6180i Phase A (aka “Phase 1”)
Keys (Power key) Press and hold to turn your phone on or off. Retractable antenna (pull here to extend it) Earpiece Press the scroll keys up or down during a call to adjust the listening volume. (Softkeys) Their current function is displayed above the key; these labels change when accessing the various phone features. (Scroll keys) Scroll through menus, submenus, and the phone book. Press and hold for continuous scrolling. Menu Names Push this key to end a phone call or to return to the start screen.
Para obtener un manual del usuario en español favor de llamar o enviar un fax al teléfono 1-888-NOKIA2U (1-888-665-4228), fax 813-287-6612.
Table of Contents 1. Safety At A Glance . . . . . . . . . . . . . . . . . . . . . . .5 2. Getting Connected . . . . . . . . . . . . . . . . . . . . . . .7 Attaching your battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Charging your new battery . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Removing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Important Battery Information. . . . . . . . . . . . . . . . . . . . . . . . 9 Cool Features . . . . . .
Call settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Call timers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Call waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Calling card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Change lock code . . . . . . . . . . . . . . . . . . . . . . . . . . .
Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 Minibrowser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53 Missed calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58 Mobile messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 NAM selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59 NAM update. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Welcome note . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 6. Receiving mobile messages . . . . . . . . . . . . . . . .89 About mobile messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 When you receive a mobile message . . . . . . . . . . . . . . . . . 90 Erasing mobile messages . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 7. Sending mobile messages . . . . . . . . . . . . . . . . .92 About mobile messages . . . . . . . . . . . . . . . . . . . . . .
1. Safety At A Glance Read these simple guidelines before using your phone. Failure to comply with these guidelines may be dangerous or illegal. Note: For more detailed safety information, “Important Safety Information” on page 111. Road Safety Comes First Don’t use a hand-held phone while driving; park the vehicle first. Switch Off In Hospitals Switch off your phone when near medical equipment. Follow any regulations or rules in force. Switch Off On Aircraft Mobile phones can cause interference.
Accessories and Batteries Use only approved accessories and batteries. Do not connect incompatible products. FCC/Industry Canada Notice Your phone may cause TV or radio interference (for example, when using a telephone in close proximity to receiving equipment). The FCC/Industry Canada can require you to stop using your telephone if such interference cannot be eliminated. If you require assistance, contact your local service facility. This device complies with part 15 of the FCC rules.
2. Getting Connected This section will help you understand the ins and outs of charging and using your battery. Attaching your battery Simply place the battery in the grooves on the back of your phone. Then slide the battery upward until it clicks. Note: Use only those batteries approved by the phone manufacturer and recharge your battery only with the chargers approved by the manufacturer. See “Important Battery Information” on page 9.
If your phone displays Not charging, charging is suspended. Check that the battery is connected only to an approved charging device. If the battery is very hot or cold, wait for a while; charging will automatically resume after the battery is restored to its normal operating temperature. If charging still fails, contact your dealer. When a charger is not in use, disconnect it from the power source.
Charging times depend on the type of battery and charger used. For approximate charging and operating times, see “Batteries” on page 105. Can you make calls while charging? Yes, you can. But your battery may not charge while a call is in progress (depending on which charger you are using). Charging should resume once you end the call. See "Chargers and other accessories" on page 106 for more information.
times but it will eventually wear out. When the operating time (talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery. • Use only batteries approved by the phone manufacturer and recharge your battery only with the chargers approved by the manufacturer. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for longer than a week, since overcharging may shorten its life.
are cooler than others! For example, did you know that you can lock the keys on your phone to prevent accidental key presses and phone calls? Or that you can call someone with the touch of a single button? You can also stop your phone from ringing without even answering the call. These are just some of the many Cool Features you’ll find in your phone. Look for the icon throughout this owner’s manual to find them.
3. Using Your Phone The first few days you have your phone, play with it to learn how the menu and submenu system works. The more you learn how to access these menus and submenus, the more fun you’ll have with your phone. This section describes the different methods of using your phone menus and submenus. What is the ‘start screen’? The start screen appears when you first turn your phone on, in its idle state.
menus and submenus. You can also use it to scroll through names and numbers in your phone book. Also, when editing names and numbers (for example, numbers in your phone book), you may notice a cursor flashing within the name or number. Pressing the scroll key up or down moves the cursor within the text, allowing you to insert letters, numbers, or special characters via the keypad. Note: See “Entering text and numbers” on page 42 for more details.
numbers, you can use them as shortcuts for accessing different menus. For example, when you scroll to Menu 2 (Call log) the number 2 appears in the top right-hand corner of the display. If you scroll to Menu 4 (Settings), submenu 3 (Security settings), your phone will display 4-3 in the top right-hand corner. Note: See “Summary of Menu Items and Shortcuts” on page 15 for a list of your phone’s features along with their menu locations. Also, see “Using Shortcuts” on page 14.
Summary of Menu Items and Shortcuts Messages ................................................................................................ 0-1 Text messages...............................................................................0-1-1 Write new1 ...............................................................................0-1-1-1 Inbox...........................................................................................0-1-1-2 Outbox1 .........................................................
Profiles...........................................................................................................3 Normal1 ................................................................................................. 3-1 Select.............................................................................................. 3-1-1 Customize..................................................................................... 3-1-2 Ringing options ............................................................
Settings (Cont.) Network services ............................................................................ 4-4 Voice privacy1 ..............................................................................4-4-1 Call forwarding2 .........................................................................4-4-2 Call waiting2 .................................................................................4-4-3 Send own caller ID with next call2 ......................................
4. The Basics You have purchased a powerful phone, with lots of features. Read this section for some very basic information on how to use your phone. A more comprehensive description of your phone is covered in “Your Phone A to Z” starting on page 22. Switching the phone on and off Press and hold the phone on or off. key for two seconds to switch the Switching off with the key Quickly press the key (Switch off! will appear, highlighted) then press OK.
Note: The phone will not work in analog mode while searching for digital service. Checking signal strength When at the start screen (see page 14) or in a call, the strength of the radio signal is indicated by the signal indicators on the left side of your phone’s display. These indicators will move up as the strength of the signal increases and down as it decreases. Increasing your phone’s signal may be easy. Try moving your phone slightly, or move towards a window if you’re calling from inside a building.
Ending a call Press Answering a call Press any key except or . Note: This assumes that Anykey answer (Menu 4-1-4) is set to On and Keyguard (see next paragraph) is not activated. If keygaurd is activated, you must press to answer the call. If you don't wish to answer the call, it will be forwarded to your voice mailbox (if you have a voice mail subscription). To stop your phone from ringing, press .
• Press and hold press OK until Unlock keys? appears, then Answering a call with Keyguard active Only the key will answer the call. After you end the call, Keyguard automatically becomes active again. Some notes about Keyguard • Calls may be possible to the official emergency number (for example, 911) programmed into your phone. The number is displayed only after you have keyed in its last digit. To initiate the call, press . • The Emergency key 9 will not work with Keyguard enabled.
5. Your Phone A to Z ABC/abc mode This allows you to enter upper and lower case alphanumeric characters into your phone. This is necessary for entering names and numbers into your phone book, as well as editing any existing alphanumeric characters. See “Entering text and numbers” on page 42 for more information. Access codes This is a security feature that allows you access to certain phone features. See “Lock code” on page 50 and “Security code” on page 75.
clock is 24-hour or am/pm). Existing digits will be replaced with the new alarm time. 3. Press OK Note: Step 4 appears only if you have selected am/pm format. See “Selecting time format” on page 37 for more information. 4. Select either am or pm and press OK When the alarm goes off Press Stop to shut off the alarm. Snoozing Press Snooze The alarm will go off again in 10 minutes. If you let the phone alarm for 1 minute without pressing a key, it stops alarming for 10 minutes then starts again.
All calls timer This feature keeps track of the approximate time you have spent on all calls with your phone. Note: See “Call timers” on page 31. Anykey answer This feature allows you to answer an incoming call by pressing any key except or . The default setting for this feature is On. To enable or disable Anykey answer, press Menu 4-1-4. Automatic answer This is a setting found in your phone’s profile settings, under the Handsfree and Headset profiles (see page 69).
Your phone will redial the number you’re trying to call up to 3 times after you hear a quick, busy signal. Press Quit or to stop the call attempts. Activating automatic redial Press Menu 4-1-2 (Settings - Call settings - Automatic redial), then scroll to On and press OK Calculator Your phone’s calculator adds, subtracts, multiplies, and divides. Warning: Your phone must be switched on to use this feature.
Calendar The calendar helps you keep track of appointments, birthdays or meetings. It can even sound an alarm when it’s time for you to make a call or go to a meeting. Warning: Your phone must be switched on to use this feature. Do not switch on the phone when wireless phone use is prohibited or when it may cause interference or danger. Note: Your phone must remain on to use the calendar’s alarm feature. If your phone is off, the alarm will not sound at its scheduled time. Using the calendar 1.
Option 1: View day notes With this option, you can view the notes of the day currently on display. (If there are no notes associated with the day, No notes for selected day appears.) Scroll through the notes. Each note allows you to choose the following Options: Erase clears the note from your calendar. Edit gives you the same prompts you got when you made the note. Move gives you the date prompt so you can move the note to another date.
Option 5: Go to date Enter the date you wish to go to. Option 6: Set the date Enter the day and month (using two-digit fields) and year (using a four-digit field), then press OK. Note: This option is necessary only if network date and time is not available. See"Clock" on page 36. Call forwarding This network service is used to forward incoming calls to another number so you won’t miss an important call. Check with your service provider for details.
confirm the feature code you entered in Menu 4-45 (see “Network feature setting” on page 61) 7. Once the feature code had been confirmed, the feature is activated Call forwarding options Forward all calls forwards all incoming calls. Forward if busy forwards calls only when you’re on the phone. Forward if not answered forwards calls if you don’t answer. Forward if out of reach forwards calls if you are out of the serving wireless network.
Call log options When you access Dialed calls, Received calls, or Missed calls and press Options, a list of options will appear. Call time shows the date and time when the call was first connected (if clock has been set) Use number allows you to view the number stored in the call log, save it in your phone book, or dial the number by pressing . Save allows you to save the number into your phone book. Erase will erase the number from the call list.
Call timers Your phone automatically keeps track of the approximate amount of time you’ve spent in calls. 1. Press Menu 2-5 (Call log Call timers) 2. Scroll repeatedly to access the following options Last call displays the duration of the last call. Note: Current call timer can be accessed by pressing Details while using the Last call timer. See page 39 for details. All calls displays call duration of all calls made since timers have last been reset (see page 36 for details on how to clear call timers).
Swapping between two calls Press Ending the calls Press to end both calls Activating call waiting You can also activate this feature with your phone; simply ask your service provider for the feature code, store it into your phone, then activate it. Note: This feature may not appear in your phone’s menu or function properly until the feature code has been stored. Note: See “Network feature setting” on page 61 for more details. 1. Press Menu 4-4-3 (Settings - Network services Call waiting) 2.
book, and that number is stored each time with a different name, then a name will not appear when someone calls from that number. Note: See “Phone book” on page 64 for details on your phone book. Calling card If you wish to use a calling card for long distance calls, you must first store your calling card information into your phone. Your phone can store up to four calling cards. Storing a calling card 1. Press Menu 4-1-3 (Settings - Call settings - Calling card) 2.
If you use a You typically are required to: calling card from:* Select this dialing sequence: MCI, AT&T True Choice, Sprint Canada, Unitel Dial 1-800 access number, then Access no. phone number, then card num- + phone no. + card no. ber (+ PIN if required) networkMCI, WorldPhone MCI Dial 1-800 access number, then Access no. card number (+ PIN if required), + card no. + phone no.
3. Scroll to highlight Select and press OK 4. Enter security code at Security code:, press OK 5. Your phone will display Card ready for use Making calling card calls Enter the phone number, including any prefix (such as 0 or 1) that your calling card may require when you make a calling card call. See your calling card for instructions. Press and hold displays Card call. for a few seconds until your phone When you see Wait for tone, then press OK, listen for the tone, then press OK.
Note: When the Dialed calls list is cleared, the shortcut list (the list that appears when you presss and a scroll key) is also cleared. Clear timers This feature clears all call timers (except the life timer) for the currently-selected NAM. The list of the last 10 dialed numbers is also cleared (this is the list that appears when you press then ). Note: See “Call timers” on page 31 for more details. 1. Press Menu 2-5-4 (Call log - Call timers - Clear timers) 2.
Manually setting the clock 1. Press Menu 4-2-1 (Settings - Phone settings Clock). 2. Scroll to Time settings, then press Select. 3. Scroll to Set clock, then press Select. 4. Enter the current time. For example, to enter 7:30, enter 0730. Press OK. 5. Scroll to am or pm, then press OK. Selecting time format If you choose am/pm format, you will notice a small indicator that appears to the right of the displayed time. If the indicator is at the top, it’s in am; if on the bottom, it’s in pm. 1.
time only if the battery is replaced or recharged while still outside of the digital network (see above). Displaying or hiding the clock 1. Press Menu 4-2-1 (Settings - Phone settings - Clock) 2. Depending on the current settings, either Hide time/ day or Show time/day will be highlighted. 3. Press Select Conference call This feature allows you to add a third party to a call. Note: This feature may not be available in all wireless systems. See your service provider for details and availability.
Current call timer This feature displays the running elapsed time on your screen while a call is active. Once the call has ended, simply press any key to clear the display (the display will also clear automatically after 10 seconds). Note: Also, see “Call timers” on page 31. Activating the current call timer Press Menu 2-5 (Call log - Call timers) and press Details.
3. Scroll to Custom tone, then press Select. 4. Scroll through the list of ringing tones until the desired tone is highlighted. • If you wait a moment while a tone is highlighted, you’ll hear the tone. • To “remove” the custom tone from the entry, select Default. 5. Press OK. Data and fax calls Note: This feature is available only if your service provider’s network supports data and fax calls. Data and fax calls may also require that you subscribe to these additional services.
Earpiece volume During a call, you can adjust the listening volume of your phone’s earpiece by pressing or . Note: See “Volume” on page 86 for details. Emergency calls 1. If the phone is not on, switch it on. 2. Key in the emergency number for your present location (for example, 911 or other official emergency number). Emergency numbers vary by location. 3. Press Note: Your phone changes to emergency call mode. If you choose to exit this mode, emergency operators may not be able to contact you.
can make an emergency call. Consult this document and your local cellular service provider. When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your cellular phone may be the only means of communication at the scene of an accident - do not cut off the call until given permission to do so. Emergency key 9 With this feature on, the phone attempts to make an emergency call when you press 9, then .
Your phone displays the icon to indicate that your phone is in ABC mode. It also displays when you are viewing names rather than numbers. When Key is displayed, you can enter these characters: Characters Key Characters .,’?!@-1 PQRS7 ABC2 TUV8 DEF3 WXYZ9 GHI4 , 0 JKL5 (See below for details) MNO6 Changes letter case (ABC/abc); long press toggles between letter mode (ABC/abc) and number mode (123) While you’re editing a name, moves the cursor to the left, and moves it to the right.
Simply press the key for about 2 seconds while in or mode and the icon will appear. While in this mode, only numbers can be entered. Letters cannot be entered unless your phone is in mode. Press the # key again for a couple of seconds if you wish to deactivate the mode. Special characters (for storing names) While in mode (see page 22), you can quickly enter a commonly used special character ( . , ‘ ? @ - ) by pressing until the character appears. To display a list of all special characters, press .
Erasing mobile messages You can erase all mobile (text) messages quickly and easily from the Text messages menu (Menu 0-1-1-5). Erase options for your phone book See “Erasing one entry from the phone book” on page 67 and “Erasing all entries from the phone book” on page 67. Fax calls Note: This feature is available only if your service provider’s network supports data and fax calls. Data and fax calls may also require that you subscribe to these additional services.
Snake Feed the snake with as many goodies as possible and watch it grow. Use keys 2 (up), 4 (left), 6 (right), and 8 (down) to turn the snake toward food. The snake can only turn 90 degrees at a time. The more goodies the snake eats, the higher the score. Using a higher level of difficulty increases the snake’s speed but also increases the point value for each goodie. If the snake hits its own tail or the surrounding wall, the game is over.
selected die. Press ∗ to roll the unlocked dice again. Game options When you select a game, you can choose from the following submenus: Level allows you to choose the level of difficulty, except for Dice, which selects the number of dice you wish to play with. New game starts a new game. Top score will display the selected game’s highest score ever played with your phone (does not appear in Logic or Dice). Instructions will describe how the game is played.
string or search for one in your phone book (see “Phone book” on page 64) Menu Allows you access most of your phone’s menu Names Allows you access to your phone book (see “Phone book” on page 64) New call Allows you to place the call to the third party when making a conference call (see "Conference call" on page 38) Keyguard This feature disables the keypad to protect against accidental keypresses. Note: See “Keyguard” on page 20 for more details.
Language Because many wireless phone customers speak English as a second language, your phone allows you to choose your phone’s displayed language. Choosing a language for your phone 1. Press Menu 4-2-5 (Settings - Phone settings Language) 2. Scroll to the language you wish to use and press OK Last call timer This feature displays the duration of your last call. Note: See “Call timers” on page 31.
may vary, depending upon items such as network features, rounding off for billing, and taxes. Also, see “Call timers” on page 31. Lights This is one of the settings in your phone’s Handsfree profile (see page 69). This feature determines whether the lights are on only when you use your phone, or if they are on at all times. This setting works only when your phone is connected to a handsfree device. 1. Press Menu 3 (Profiles) 2. Your phone lists each profile.
page 75). Changing your lock code In a lock code, only numeric characters are accepted. 1. Enter Menu 4-3-2-3 (Settings - Security settings Access codes - Change lock code) 2. Enter lock code at Enter lock code: and press OK 3. Enter new lock code, press OK 4. Verify new lock code, press OK Note: When you change your lock code, make sure you store it in a safe place, away from your phone. Avoid entering access codes similar to emergency numbers to prevent accidental emergency calls.
Press Names, scroll to Options and press Select. Then scroll to Memory status and press Select again. Messages This feature allows you to access your voice and mobile (text) messages, as well as composing your own welcome note. Using messages 1. Press Menu, then Select 2. Scroll to one of the following options, then press Select 1-1 Text messages - See page 80. 1-2 Voice messages - See page 83. 1-3 Welcome note - See page 87.
Muting and unmuting your phone You can mute the phone’s microphone during a call; simply press Mute. To unmute the microphone, press Unmute. If these texts are not available, press Options, scroll to Mute or End mute and press Select. Muting and unmuting also affect the microphones of any accessories connected to the phone. Minibrowser Note: This feature is available only if your service provider's network supports wireless internet access.
within a single session. This is normal and is designed to minimize your bill. Rates will vary according to your billing plan. When the Minibrowser disconnects from the network, the active call icon ( ) disappears, but the Minibrowser icon ( ) remains. While you are in the Minibrowser you can still access pages stored in memory without being connected to the Internet. However, if you navigate to a page that is not stored in memory, a new Minibrowser session begins and you'll be billed accordingly.
Minibrowser menu While in the Minibrowser, press and release key) to display the Minibrowser menu: (power Help - Show a help page for the current site (accessible from some pages). Home - Return to the Home page. Bookmark page - Set a bookmark for the current page. Show URL - Show the web address (Uniform Resource Locator) for the current page. Restart - Return to the Home page and delete all stored pages. Version - Show the version of Minibrowser software.
Go to the Home Page • Press repeatedly to move back through previously viewed pages until the Home Page appears • OR, press and release to display the Minibrowser menu, scroll to Home, then press OK Activate an item (for example, a link) • Press the appropriate number key on your phone’s keypad (if the item on the page is numbered) • OR, scroll to the item, then press the appropriate softkey (for example, to activate a link).
2. Press the appropriate softkey. (If the link is a phone number, in some cases, you can also press to make the call.) Bookmarks You can set a bookmark for a web page so that you can quickly go to that page later. (You may also be able to set bookmarks via a personal account at your service provider's web site.) Set a bookmark 1. Go to the page for which you want to set a bookmark. 2. Press and release appears. 3. Scroll to Bookmark page, then press Select.
Minibrowser session. 1. Press Menu 4-1-5. The following options appear: • On connection - Before connecting to the web, your phone prompts you to confirm your choice. • On exit - Before exiting the Minibrowser session, your phone prompts you to confirm your choice. • Both - Your phone prompts you to confirm your choice before connecting to the web and before exiting the Minibrowser session. • Never - Your phone never prompts you to confirm your choice. 2.
Checking the missed calls list anytime Press Menu 2-1 (Call log - Missed calls), then scroll through the list. When the Forward if not answered option in the Call Forwarding feature (see page 28) is selected, your phone will not treat the forwarded calls as missed calls. Note: Also, see “Call log” on page 29 for details on other call lists. Mobile messaging See ‘Receiving mobile messages’ on page 89 and ‘Sending mobile messages’ on page 92.
Note: You need at least one active number to make calls. You cannot change from one NAM to another during a call. NAM update The Number Assignment Module (NAM) in your phone contains your assigned phone number(s) and other system information that your service provider entered during activation. The NAM update feature allows you to easily activate or reactivate your phone without having to go to your service provider.
activating the phone. If this happens, select the appropriate selection for your phone. If you don’t want your service provider to change your lock code, select Lock. If you want to allow your service provider to change your code to prevent other service providers from activating your phone, press Unlock. If you wish to do neither and want to return to the start screen, press and hold . Note: This feature may not be available in all systems.
3. Scroll to the service that the code applies to and press Select 4. Scroll to suboption, then Select (Repeat step as required, based on number of suboptions) (Use step four only for call forwarding options) 5. Scroll to Activate or Cancel, then press OK Network services Some of the features in this menu are network services that require a subscription. Contact your service provider for details and availability. 4-4-1 Voice privacy - See page 86. 4-4-2 Call forwarding * - See page 28.
Assigning one-touch dial locations 1. Press Names, scroll to 1-touch dialing and press Select 2. Scroll to next available empty location, (empty) will appear, then press Assign 3. Scroll to select desired name and press Select 4. Repeat as necessary Calling a number using one-touch dialing Press and hold the key (2 through 8) for about two seconds to call the number in the corresponding onetouch dial location. You can also press the key and then if you prefer.
Paging If your service provider supports paging, you can receive pages with your phone. A page is a special type of mobile message. See ‘Receiving mobile messages’ on page 89. Phone book About the phone book The phone book lets you quickly make a call by selecting a name from a list of up to 200 entries. An entry consists of a name and phone number. You can also associate an email address with an entry, for use when addressing a mobile message.
you can quickly enter the email address by selecting the name in your phone book. 1. At the start screen, display the list of phone book entries by pressing , then scroll to a phone book entry. 2. Press Details, then Options (or, if the scrolling view for your phone book is set to Name+number, just press Options). 3. Scroll to E-mail, then press Select. 4. Enter the email address (48 characters maximum), then press OK.
2. Press . Your phone dials the number associated with the name and displays the dialed number on the screen. Phone book options To display a list of phone book options, press Names. Scroll to one of the following items, then press Select. • Search allows you to search for a name. • Add new allows you to add an entry (name and phone number) to your phone book.
press Options). 3. Scroll to E-mail, then press Select. 4. Edit the email address, then press OK. Erasing one entry from the phone book Caution: This procedure cannot be undone. 1. Highlight the name in the list of phone book entries. See ‘Finding a name in the phone book’ on page 65. 2. Press Details, then Options (or, if the scrolling view for your phone book is set to Name+number, just press Options). 3. Scroll to Erase, then press Select. 4. A confirmation message appears: Erase?. 5.
Activating and deactivating phone lock Press Menu 4-3-2-1 (Settings - Security settings Access codes - Phone lock). Enter the lock code then press OK. Then scroll to On or Off, and press OK. Complete the phone lock activation or deactivation by turning your phone off and back on. When your phone is locked, calls may be possible to an official emergency number (for example, 911) programmed into your phone including calls with Emergency key 9 (page 42).
Profiles You can adjust and customize your phone to whatever environment you find yourself in (for example, shopping mall, movie theater, etc.). Each profile uses its predefined settings to determine your phone’s ringing volume, ringing tone, message alert tone, keypad tones, warning tones, etc., for a number of different environments. These settings can be changed at any time, and each profile can be selected in a matter of seconds.
• Ringing options • Ringing volume • Ringing tone • Vibrating alert • Keypad tones • Warning and game tones • Message alert tone • Lights (appears only in Handsfree) • Automatic answer (appears only in Handsfree and Headset) Rename allows you to rename certain profiles. Note: Handsfree and Headset will not appear in the profiles list unless your phone has been connected to a handsfree device or a headset. However, they will remain in the menu once connected for the first time.
Received calls options See “Call log options” on page 30. Restore factory settings You can reset the settings of many of your phone’s features to factory defaults (as in a new phone). Restoring factory settings Press Menu 4-2-4 (Settings - Phone settings - Restore factory settings), enter your phone’s security code and press OK. Note: Your phone book, timers, language selection, security code and lock codes are not reset. However, any profiles you have modified will reset when you restore your settings.
3. Enter the security code and press OK Note: The message “Caller ID must be available” will display prior to creating an incoming call restriction. 4. Scroll to Add restriction to create an outgoing or incoming call restriction and press OK 5.
2. Scroll to Restrict outgoing calls or Restrict incoming calls and press Select 3. Enter the security code and press OK 4. Scroll to Edit and press OK 5. Scroll to the restriction you wish to edit, press OK Note: If no name has been entered for a restriction, the restricted number will be displayed. 6. Edit the restriction, then press OK 7. Edit name if desired using same procedure as above Erasing a call restriction 1. Press Menu 4-3-1 (Settings - Security settings Restrict calls) 2.
3. Highlight Customize and press OK. Scroll to Ringing options, then press Select. 4. Highlight either Ring, Ascending, Ring once, Beep once or Silent and press OK Note: The Ascending ringing option plays the selected ringing tone at a low volume, then gradually increases in intensity with each ring. Ringing tone This is one of the settings in your phone’s profiles (see page 69). It allows you to choose one of the many ringing tones your phone uses for incoming voice calls.
Scrolling view You have three different options on how you can view the phone book. Your choices are: Name list shows all stored names in a scrolling list. Three names will appear at any given time. To view other names in the directory, scroll the list. Name list is the default setting. Name+number displays individual names and numbers stored in your directory. Only one name will display on your screen at a time, with the corresponding phone number. Scroll to view other names.
Note: If you have changed your security code and don’t remember the new code, contact your service provider. Once you have changed your security code, the default setting is no longer valid. Your phone will prompt you for a five digit security code for certain features. These features can be used only after the correct security code has been successfully entered. Note: When entering your security code, ***** will appear on the display to keep others from viewing your code.
Send own caller ID with next call In most service areas, when you call someone, their caller ID system allows them to see your name and phone number. Your phone is set to automatically allow this information to be seen. Before you make a call, you can choose to prevent this information from being seen. This is sometimes referred to as “blocking caller ID”. Warning: While roaming, you may not be able to block caller ID.
Storing a name and number You can save names and numbers in the Phone book. Either use the method described in “Adding an entry to the phone book” on page 64 or the “quick save” method described below. Quick save Enter the phone number and press Save. Enter a name at Name: if you wish (optional), then press OK. Note: To save the number without entering a name, press and hold Save for 2 seconds. The number will appear at the end of your phone book list. Also, see “Entering text and numbers” on page 42.
service provider to find out how your selection will affect your service charges. Roaming Roaming is the condition of using your phone outside of its home area. While roaming, another service provider’s system handles your call, so the service rate for the call is usually greater than the rate for calls made within your home area. While roaming, the word Roaming and the roaming indicator ( ) appear on the start screen.
• Analog - Your phone searches for an available analog system. If an analog system is not available, No Service appears. While Analog is selected, if you power your phone off and back on, your phone will automatically be reset to Automatic B. Text messaging See ‘Receiving mobile messages’ on page 89 and ‘Sending mobile messages’ on page 92. Touch tone length This feature determines the length of each touch tone when they are sent automatically. Short sets the tone length to .1 second.
Sending a touch tone string Make sure Menu 4-2-3-1 (Settings - Phone settings Touch tones - Manual touch tones) is not set to Off. During a call, 1. Press Options 2. Scroll to Touch tones and press OK 3. Enter touch tone string or recall string from the phone book and press OK Note: Use caution when sending confidential information over the air when using DTMF tones in analog mode. Storing touch tone strings with phone numbers 1. Enter the phone number (for example, your office voice mailbox) 2.
Storing the unlocked phone number 1. Press Menu 4-3-2-2 (Settings - Security settings Access codes - Unlocked phone number) 2. Enter lock code and press OK 3. Enter phone number at Number: (or press Search and scroll through the phone book) 4. Press OK Note: Saving a new unlocked phone number will overwrite the old one. Calling the unlocked phone number Note: Your phone must be locked via the phone lock to use this feature.
have chosen the Ring once option for the profile you’re using, the vibrating alert will only vibrate once when your phone rings. Voice mailbox number This number dials your voice mailbox. Note: See “Voice messages” in next section. Voice messages Voice mail is a network service that may require a subscription from your service provider. Once everything is set up for your voice mailbox (see next page), your phone will notify you when you receive a voice message.
how to store your password, contact your service provider. You’ll also need to contact them on how to listen to voice messages once you’re connected to your voice mailbox. Listening to your voice messages If New voice message is displayed, just press Listen and follow the prompts. If you’d rather listen to your messages later, press Exit. You can listen to messages anytime if you press and hold the 1 key (or press 1, then ). Calling voice mailbox will appear on the display.
currently using your phone does not automatically clear the voice message icon, you can manually clear the icon. To clear the icon, press Menu 0-1-2-3 (Messages - Voice messages - Clear voice message icon), then press Clear.
Voice privacy Note: Availability of this feature depends on your arrangement with your service provider and the network’s ability to support the feature. Some service provider’s networks can encrypt the signal transmitted during a phone call to ensure others are unable to listen to your conversation. By default, the voice privacy setting on your phone is set to Off. To turn it on, press Menu 4-4-1 (Settings - Network services Voice privacy). Scroll to On, then press OK.
2. Your phone lists each profile. Scroll to the profile you want and press Options. 3. Highlight Customize and press OK. Scroll to Ringing volume, then press Select. 4. Scroll through the options. When you hear the volume level you wish to use, press OK. Warning and game tones This is one of the settings in your phone’s profiles (see page 69).
Note: See “Entering text and numbers” on page 42 for details.
6. Receiving mobile messages Note: You can receive mobile messages if you have subscribed to the mobile messaging service offered by your service provider and the network in which you are using your phone supports mobile messaging. About mobile messages You can receive a message in the form of text that appears on your phone’s screen. Messages are managed by your service provider’s message center.
message determines which message is deleted: • Normal (non-emergency) messages - When a normal message is received, the oldest read message in the Inbox is deleted.
address into your phone book. • Use web link allows you to direct the Minibrowser to a web address (URL) that appears in the body of the message. (Availability of the Minibrowser depends on your arrangement with your service provider.) Erasing mobile messages To erase the message you’re reading, press Options, Erase. To erase multiple messages, press Menu 0-1-1-5. Press Select. Choose the type of message to erase.
7. Sending mobile messages Note: You can send mobile (text) messages if you have subscribed to the mobile messaging service offered by your service provider and the network in which you are using your phone supports mobile messaging. About mobile messages You can use your phone to send mobile messages that can be addressed to email addresses and phone numbers.
message. An icon or message should then appear on the recipient’s phone (or other device) to indicate the high priority level of your message. Delivery notification When you send a message, you can request to be notified when the recipient receives the message. This notification is called a delivery note. If you addressed the message to more than one recipient, a separate delivery note appears for each recipient.
• If the message is in the Saved folder, press Menu 0-1-1-4 (Messages - Text messages - Saved). Scroll to the message. 2. Press Read. 3. Press Options, Reply (or Reply w/ copy if you want your reply to include a copy of the original message followed by the text of your reply). 4. Select the type of message for your reply. Resending a message 1. In the Outbox, read the message that you want to resend. 2. Press Options, then Resend.
address with an entry” on page 64.) To enter an email address from the phone book, press Options, then Search. When entering an address manually, you can quickly repeatedly until it enter the @ symbol by pressing appears. When addressing multiple recipients, separate each address with a comma. If you use the Search feature, a comma is automatically entered after each address. To manually enter a comma, press repeatedly until the comma appears, OR press , then select a comma from the list of special symbols.
for each letter you enter. Activating predictive text input Before you can use the predictive text input method, you must activate the feature. While editing a message, press Options, Dictionary, then choose any language. The predictive text input method is now available for use when editing. Changing the language of the dictionary While editing a message, press Options, Dictionary, then choose a language.
presses. At this point, you can add the word to the dictionary by pressing Spell. Writing compound words To quickly write a compound word (for example, bluejay): 1. Write the first part (blue). 2. Press (do not enter a space). The underline disappears from the first part. 3. Write the second part (jay). Deleting characters To delete one character to the left of the cursor, press Clear. To delete all characters in the message, press and hold Clear.
, OR, press Options, Insert number. Inserting special characters To insert a special character (such as a punctuation mark), press and hold , OR press Options, Insert symbol. To quickly insert a period (.), press . To quickly insert double dashes (--) or three elipses (...), press a few times. Adding a word to your personal dictionary If your phone’s dictionary does not contain a word, you can add it to your personal dictionary. If the ? character appears after the word, press Spell.
13. I’m sorry. 14. Call at your convenience. 15. Please call ASAP. Brackets ([ ]) in a template represent a value that you can specify. (The value is not retained for future use; you enter the value each time you use the template.) If you select a template that contains brackets, you’ll be prompted to enter a value. You can edit the template text after you insert it into your message. Sending a mobile message When you’re done editing your message, to send it: • Press • OR, press Options, then Send.
8. Data and Fax Calls Note: This feature is available only if your service provider’s network supports data and fax calls. Data and fax calls may also require that you subscribe to these additional services. Please check with your service provider before sending or receiving data or fax calls. Your phone can function as a fax/modem when connected to your PC or laptop computer via the optional DLR-3 Data Cable (available through your local Nokia dealer).
Getting started Make sure your phone is connected to your computer via the optional DLR-3 Data Cable and your computer recognizes the new hardware. See the installation and configuration instructions supplied with the DLR-3 cable for more information. Configuring your data or fax software Once properly connected and configured, your PC will recognize your phone as an external fax/modem. However, your fax or data software may already be configured to use the existing PCMCIA or internal modem.
Note: Data or fax calls cannot be initiated using your phone’s keypad. All data and fax calls must be initiated using the data or fax software. Note: Any touch tones (DTMF tones) needed for calling cards, special long-distance access numbers, etc. must be programmed into the dialing string. To receive a data or fax call Your phone must be connected to your PC via the data cable. 1. The appropriate data or fax software must be running.
To preset your phone to receive a data call: AT+CSP=1 To preset your phone to receive a fax call: AT+CSP=2 You should only have to make this modification once; these settings typically are saved as a part of your data or fax program’s settings. Please refer to the documentation or online help files for your data or fax application when modifying your modem’s initialization string.
9. Accessories If you want to enhance your phone’s functionality, an extensive range of accessories is available for you. You can select any of these items to help accommodate your specific communication needs. For availability of these and other accessories, contact your service provider. A few practical rules for accessory operation: Keep all accessories out of reach of small children. When you disconnect the power cord of any accessory, grasp and pull the plug, not the cord.
Batteries Several batteries are available for use in your phone: • BLS-2N Extended Battery Li-Ion 900 mAh • BLS-4 Ultra Extended Battery Li-Ion 1500 mAh • BMS-2S Extended Battery NiMH 900 mAh The battery model number is on the battery label which is visible when the battery is removed from the phone. Charging Time (Hours) Battery Charging Configuration BLS-2N BLS-4 BMS-2S ACP-7U charger 4.0 5.0-6.0 4.0 ACP-9U charger 2.0 3.5 1.5 LCH-9 charger 2.0 3.5 1.5 ACP-7U charger 4.0 5.0-6.0 4.
Standby and Talk Times Digital Talk Time Analog Talk Time Standby Time BLS-2N Extended Battery Li-Ion 900 mAh 2 hrs to 2 hrs 55 min 40 min to 1 hr 25 min 70 to 110 hrs (dig) 10 to 15 hrs (ana) BMS-2S Extended Battery NiMH 900 mAh 2 hrs to 2 hrs 55 min 40 min to 1 hr 25 min 70 to 110 hrs (dig) 10 to 15 hrs (ana) Battery Option 3 hrs 20 min to 1 hr 10 min to 115 to 180 hrs (dig) BLS-4 Ultra 2 hrs 25 min 15 to 23 hrs (ana) Extended Battery 4 hrs 50 min Li-Ion 1500 mAh Note: The times shown are app
from the charger to the base of your phone. The charger can also be used together with the Compact Desktop Charging Stand (DCH-8). Rapid Travel Charger (ACP-9U) This lightweight (100g) AC charger can be used with all battery options. Calls can be made during charging, even with a fully discharged battery. To use the Rapid Travel Charger (ACP-9U), plug it into a standard 120V AC wall outlet, and connect the lead from the charger to the base of your phone.
switched on. Desktop Charging Stand (DCH-8) Used together with the Standard Travel Charger (ACP-7U) or the Rapid Travel Charger (ACP-9U), the Compact Desktop Charging Stand (DCH-8) is an economical choice when you need your phone close at hand. With the battery still attached, place your phone in the charging stand to begin charging your phone’s battery. Charging is indicated by the scrolling battery bars on the right side of your phone’s display.
phone’s screen. Charging moves to the rear slot once the front battery is 100% charged. When the spare battery is charging, check the status indicator on the left side of the charging stand. A red light indicates that the battery is charging; a green light indicates that the battery is charged to at least 80% of its capacity. The phone has the built-in intelligence to maintain the battery, so there is no need for a discharge feature on the stand.
10. Troubleshooting What if charging fails? If your phone displays Not charging, charging is suspended. Make sure the battery is connected to an approved charging device and that the battery is at room temperature. Extreme temperatures, hot or cold, can affect your battery’s performance and prevent charging. If charging still fails, disconnect the charger from your phone. Then reconnect the charger to your phone and retry.
11. Reference Information Important Safety Information Traffic Safety Do not use a hand-held telephone while driving a vehicle. If using a hand-held phone park the vehicle before conversing. Always secure the phone in its holder; do not place the phone on the passenger seat or where it can break loose in a collision or sudden stop. The use of an alert device to operate a vehicle’s lights or horn on public roads is not permitted.
• Should not carry the phone in a breast pocket; • Should use the ear opposite the pacemaker to minimize the potential for interference. • If you have any reason to suspect that interference is taking place, switch off your phone immediately. Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider.
operations are in progress. Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats; chemical transfer or storage facilities; vehicles using liquefied petroleum gas (such as propane or butane); areas where the air contains chemicals or particles, such as grain, dust or metal powders; and any other area where you would normally be advised to turn off your vehicle engine.
networks or when certain network services and/or phone features are in use. Check with local service providers. Making an Emergency Call 1. If the phone is not on, switch it on 2. Key in the emergency number for your present location (for example, 911 or other official emergency number). Emergency numbers vary by location. 3. Press Note: If certain features are in use (keyguard, restrict calls, etc.), you may first need to turn those features off before you can make an emergency call.
at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government-adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model.
• Do not store it in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. • Do not store it in cold areas. When the phone warms up (to its normal operating temperature), moisture can form inside the phone, which may damage the phone's electronic circuit boards. • Do not attempt to open it. Non-expert handling of the device may damage it. • Do not drop, knock or shake it. Rough handling can break internal circuit boards.
12. Technical Data Wireless System Weight Dual-Band CDMA and AMPS 142.5 g (5.0 oz.) with BLS-2N 900 mAh Li-Ion Battery Size 129 cc (7.9 cu. in.) Frequency Range 824.04 - 848.97 MHz (TX) 869.04 - 893.97 MHz (RX) Battery Voltage 3.6 V nominal Charging current 850 mAh max.
Nokia, Connecting People and the Original Accessories logos are trademarks of Nokia Corporation and/or its affiliates. The information contained in this phone was written for dualmode CDMA and AMPS phones. The right to make changes and improvements to any of the products described in this guide without prior notice is reserved. ©2000 Nokia Mobile Phones. All rights reserved. These commodities are authorized by the U.S. Government for export only to Canada, Mexico, or the United States.
13. Warranty NOKIA One-Year Limited Warranty Nokia Mobile Phones, Inc. (“NMP”) warrants that this cellular phone (“Product”) is free from defects in material and workmanship that result in Product failure during normal usage, according to the following terms and conditions: 1. The limited warranty for the Product extends for ONE (1) year beginning on the date of the purchase of the Product. 2.
b) The Product has been damaged from external causes such as collision with an object, or from fire, flooding, sand, dirt, windstorm, lightning, earthquake or damage from exposure to weather conditions, an Act of God, or battery leakage, theft, blown fuse, or improper use of any electrical source, or damage caused by the connection to other products not recommended for interconnection by NMP.
f) If the Product is returned to NMP during the limited warranty period, but the problem with the Product is not covered under the terms and conditions of this limited warranty, the Consumer will be notified and given an estimate of the charges the Consumer must pay to have the Product repaired, with all shipping charges billed to the Consumer. If the estimate is refused, the Product will be returned freight collect.
13. This is the entire warranty between NMP and the Consumer, and supersedes all prior and contemporaneous agreements or understandings, oral or written, and all communications relating to the Product, and no representation, promise or condition not contained herein shall modify these terms. 14. This limited warranty allocates the risk of failure of the Product between the Consumer and NMP. The allocation is recognized by the Consumer and is reflected in the purchase price of the Product. 15.
A Access codes 22 Lock code 50 Security code 75 Accessories 104 Batteries 105 Chargers 106 Alarm Clock Power off 23 Setting 22 Snooze 23 Alarm clock 22 All calls timer 24 Answering a call 20 Automatic answer 24 Automatic redial 24 B Basics 18 Answering a call 20 Ending a call 20 Getting a strong signal 18 Making a call 19 Switching phone on and off 18 Batteries 105 Attaching the battery 7 Charging the battery 7 Charging times 105 Discharging batteries 9 Important battery information 9 Removing the battery
Missed calls 58 Received calls 70 Call restrictions 71 Call settings 30 Call timers 31 All calls timer 24 Clearing call timers 36 Current call timer 39 Life timer 49 Call waiting 31 Caller ID 32 Blocking 77 Send own caller ID 77 Calling card 33 Making calling card calls 35 Storing calling cards 33 Care and maintenance 116 Charging 7 Chargers 106 When is a good time to charge? 8 When is charging complete? 8 Clear call lists 35 Clear timers 36 Clock 36 Alarm clock 22 Conference calls 38 Cool features 10 Alarm
Data calls 100 Configuring software 101 Getting started 101 Manual selection 102 Prearranged 102 Receiving 102 Starting a call 101 Dialed calls 40 E Earpiece volume 86 Editing 123 mode 43 ABC mode 42 Special characters 44 Emergency calls 41, 113 Emergency key 9 42 Emergency key 9 42 Ending a call 20 Entering letters and numbers 42 Erasing names and numbers 67, 67 F Fax and data calls 40 Fax calls 100 Configuring software 101 Getting started 101 Manual selection 102 Prearranged 102 Receiving 102 Starting a
Keypad tones 48 L Languages 49 Last number redial 49 Life timer 49 Lights 50 Lock code 50 Changing your lock code 51 Phone lock 67 M Making a call 19 Making calling card calls 35 Manual touch tones 51 Memory status 51 Menu and submenu numbering 13 Message alert tone 52 Messages 52 messages mobile 89 receiving mobile 89 Microphone 52 Muting and unmuting 52, 53 Minibrowser 53 Missed calls 58 mobile messages 89 N NAM Selection 59 NAM update 60 Names Adding to phone book 64 Network feature setting 61 Network
O One-touch dialing 62 P Phone book 64 Adding a name 64 Erasing names and numbers 67 Scrolling view 75 Phone lock 67 Lock code 50 Unlocked phone number 81 Phone numbers Adding to phone book 64 Phone settings 68 Profiles 69 Customizing profiles 69 Keypad tones 48 Lights 50 Message alert tone 52 Renaming profiles 70 Ringing options 73 Ringing tones 74 Ringing volume 86 Selecting profiles 69 Vibrating alert 82 Warning and game tones 87 Q Quick saving numbers 78 R Ready screen 12 Received calls 70 Redialing
S Safety At a glance 5 Important safety information 111 Using this guide 6 Scroll bar 13 Scroll key 12 Scrolling view 75 Security code 75, 75 Changing your security code 76 Security settings 75 Service Types 79 Setting time (manual) 37 Setting time (network) 37 Settings 77 Signal strength 18 Softkeys 12 Special characters (names) 44 Special characters (numbers) 44 Storing a calling card 33 Storing names and numbers Quick save 78 Summary of menu items 15 Switching phone on and off 18 Synchronization 78 Syste
Navigating tools 12 Menu and submenu numbering 13 Scroll bar 13 Scroll key 12 Softkeys 12 V Vibrating alert 82 Voice messages 83 Greetings, passwords, and prompts 83 Listening to your voice messages 84 Setting up your voice mailbox 83 Volume 86 Earpiece volume 86 Ringing volume 86 W Warning and game tones 87 Welcome note 87 Y Your phone A to Z 22
