Printer User Manual

Copier/Document Server Features
114
4
❖ Reserve Job Mode
You can set whether to reset the mode to the initial state or return to the mode
in use before the reserved operation was started when you return to the initial
screen after reserved copying finishes.
• Reset
• Previous job
❖ Reservation Screen Auto-off Timer
You can set the time required until the display is switched to the reserved first
job display after reservation is set.
If you select “Switch”, use the numbers keys to enter the time (10-99 seconds).
The default setting is 15 seconds.
•Yes
• No
❖ Max. Copy Quantity
The maximum copy quantity can be set between 1 and 9999.
The default setting is 9999 sheets.
❖ Original counter reset key
You can set whether to enable the document counter reset key.
•On
• Off
❖ Auto Tray Switching
When the paper runs out during copying, it can be automatically fed from a sub-
stitute paper feed tray, irrespective of the orientation of paper in that tray – pro-
vided it is the same size as that set in the other paper feed tray during automatic
paper selection. This function is called “Auto Tray Switching”. You can set
whether to perform the Auto Tray Switching.
• With Image Rotation
You can copy using the Auto Tray Switching function. Depending on the
function being performed rotation may not be possible.
• Without Image Rotation
You can make continuous copies provided paper of the same size and ori-
entation is loaded. The “Supply paper” message appears when paper of
the same size and orientation runs out. Copying is interrupted when this
happens.
•Off
The “Supply paper” message appears when paper runs out. Copying is in-
terrupted when this happens.