Printer User Manual

Input/Output
143
4
❖ Staple Position
Specify which Top 2 staples or Bottom shown on the initial display with pri-
ority.
The optional Finisher AFE, or the Booklet Processor is required to use this
function.
•Top 1
•Slant
•Left 2
•Top 2
•Bottom 1
• Top Right 1
• Right 2
•Off
❖ Punch Type
Specify which punch type (2 holes or 3 holes) has priority to be shown on the
initial display.
The optional Finisher AFE and Multi-hole Punch Unit is required to use this
function.
•Left 2
•Top 2
• Right 2
•Left 3
•Top 3
• Right 3
•Off
❖ Finisher: Staple Position
Specify the stapling position.
The optional Finisher AFE, or the Booklet Processor is required to use this
function.
•Top 1
•Slant
•Left 2
•Top 2
•Bottom 1
•Center
• Top Right 1
• Right 2
•Off