Printer User Manual

Connecting to the Interfaces

Connecting to the IEEE 1284 Interface

Connect the IEEE 1284 interface cable to the IEEE 1284 interface board (optional).

A Make sure the main power switch on the machine is "Off".

If the main power switch is turned "On", turn it "Off".

B Turn off the main power switch of the host computer

C Connect the IEEE 1284 interface cable to the IEEE 1284 port.

To make the connection, use the conversion connector (1) supplied with the

optional IEEE 1284 interface board.

D Plug the other end of the cable into the interface connector on the host com-

puter.

Make sure about the shape of the connector to the computer. Fasten the con-

nector securely to the computer.

E Turn the main power switch of the machine "On".

F Turn on the host computer.

When using Windows 95/98/Me/2000/XP and Windows Server 2003, a

printer driver installation screen might appear when the computer is turned

on. If this happens, click [Cancel] on the screen.

Note

❒ Don't connect the cable in loop state.

❒ For details about installing the printer driver, see "Preparing the Machine"

Printer Reference

Reference

"Turning On the Power" About this machine

"Preparing the Machine" Printer Reference