Printer User Manual

Registering Addresses and Users for Scanner Functions

202

R Press [Exit].

Note

❒ To register the name, see Registering Names”.

❒ You can enter a path using up to 128 characters.

❒ To specify a folder, you can either enter the path manually or locate the

folder by browsing the network.

❒ If the connection test fails, check the settings, and then try again.

❒ When Do not Specify is selected, the SMB User Name and SMB Password

that you have specified in Default User Name / Password (Send) of File

Transfer settings applies.

❒ If User Authentication is specified, contact your administrator.

Reference

p.184 “Registering Names”

p.202 “To locate the folder manually”

p.203 “Using Browse Network to locate the folder”

To locate the folder manually

A Press [Change] under Path.

B Enter the path where the folder is located.

C Press [OK].

If the format of the entered path is not correct, a message appears. Press [Exit],

and then enter the path again.

Note

❒ Enter the path using the format as follows : ”\\ServerName\ShareName\Path-

Name”

❒ You can also enter an IPv4 address.

❒ You can enter a path using up to 128 characters.