Printer User Manual

Network Settings
33
1
Note
❒ As to [Effective Protocol], check if the protocol to use is set as [Active].
❒ [IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b)
are connected, the selected interface takes precedence.
Reference
p.52 “Interface Settings”
p.62 “File Transfer”
Using Utilities to Make Settings
The network settings can be specified not only on the machine’s control panel
but also using utilities such as Web Image Monitor, SmartDeviceMonitor for Ad-
min, and telnet.
Note
❒ For details about using Web Image Monitor, see "Using Web Image Monitor",
Network Guide.
❒ For details about using SmartDeviceMonitor for Admin, see "Using SmartDe-
viceMonitor for Admin", Network Guide.
❒ For Details about using telnet, see "Remote Maintenance", Network Guide.
Reference
"Using Web Image Monitor" Network Guide
"Using SmartDeviceMonitor for Admin" Network Guide
"Remote Maintenance by telnet" Network Guide
interface settings/Network Permit SSL/TLS Communication As required
interface settings/Network Host Name As required
interface settings/
IEEE 802.11b
Communication Mode Mandatory
interface settings/
IEEE 802.11b
SSID Setting As required
interface settings/
IEEE 802.11b
Channel As required
interface settings/
IEEE 802.11b
Security Method As required
interface settings/
IEEE 802.11b
Transmission Speed As required
Heading Setting Item Setting Requirements