Printer User Manual

System Settings

❖ Z-fold position

Set the folding-back position in units of 1 mm when you specify Z-folding.

The machine is shipped from the factory with this value set to 2 mm (metric

version) or 0.1 inch (inch version).

The setting range of the folding position for each paper size is given below:

•Metric version

• A3: 2 - 25 mm

• B4 JIS: 2 - 40 mm

• A4: 2 - 10 mm

• 11 × 17: 2 - 20 mm

•8

× 14: 2-35 mm

•Inch version

• A3: 0.1 - 1.0 inch

• B4 JIS: 0.1 - 1.6 inch

• A4: 0.1 - 0.4 inch

• 11 × 17: 0.1 - 0.8 inch

•8

× 14: 0.1 - 1.4 inch

Note

❒ If the Panel Key Sound setting is [Off], the beeper does not sound, whatever

the Warm Up Notice setting.

❒ The Function Reset Timer setting is ignored if Interleave is set for Print Prior-

ity.

Reference

p.3 “Accessing User Tools (System Settings)”

"Function Compatibility", Copy/Document Server Reference

Output tray settings

Important

❒ You cannot interrupt the current stapling job even if a stapling job is specified

by a different function.

❒ When the 3000-sheet finisher or booklet finisher are installed and stapling or

shift sorting are specified for a job, the job will be delivered to the finisher

shift tray regardless of the output tray specified.

❒ Paper that is fed from the bypass tray cannot be delivered to finisher trays.