User's Manual

Messaging
Go to Desk → Tools → Control panel → Messaging.
See Editing fax settings on page 34.
See Multimedia message account settings on page 33.
See Text message settings on page 31.
Service message
To edit reception and authentication settings for service messages, select Messaging → Service message. In the Reception:
field, select Yes if you want to receive all service messages to your Inbox. Select No to ignore all service messages.
Connections
Go to Desk → Tools → Control panel → Connections.
• Internet setup—
See Internet setup on page 66.
• Bluetooth—
See Bluetooth on page 83.
Wireless LAN
To view the status of the wireless LAN connection, select Connections → Wireless LAN. On the Status page you can view the
connection status, network name, and connection security and quality.
To view information on networks, wireless LAN access points, or ad hoc networks, select Connections → Wireless LAN, and
select the Networks page. In the Display field, select the network item you want, and press View details.
• Networks—Select this to view the all the wireless LAN networks that can be accessed, and the signal strength of that
network.
• Access points—Select this to view the wireless LAN access points that are currently in range and available, and the radio
frequency channel they are using.
• Ad hoc networks—Select this to view available ad hoc networks.
To view details on EAP (extensible authentication protocol) security modules, select Connections → Wireless LAN, and select
the Security page. The page contains a list of the installed EAP modules that are used in a wireless LAN to relay port access
requests between wireless devices, wireless LAN access points, and authentication servers. Select a module, and press View
details. Each of these modules can be modified together with Internet access points.
Specifying wireless LAN settings
You can change settings that are common to all wireless LAN connections.
To modify general wireless LAN settings, select Connections → Wireless LAN, and select the Settings page.
Define the following:
• Background scan interval—Specify how often you want the device to scan for available networks. To reduce battery
consumption, select Never. The wireless LAN icon is displayed in the indicator area when a network is found.
• Simultaneous Bluetooth usage—Select Allowed if you want to be able to use a Bluetooth connection during a wireless LAN
connection.
To modify advanced wireless LAN settings, select Connections → Wireless LAN. Select the Settings page, and press Advanced
settings. Press OK.
Define the following:
• Automatic configuration—Select Off if you want to specify the advanced wireless LAN settings manually. Do not change
the settings manually unless you are sure how each setting affects system performance. System performance may drop
dramatically if automatic settings are not used.
• Ad hoc channel—Specify the radio frequency channel on which you want to set up an ad hoc network. Select Automatic if
you want to be allocated an available channel automatically.
• Long retry limit—Specify the maximum number of transmission attempts of a frame whose size is greater than the RTS
(request to send) threshold.
• Short retry limit—Specify the maximum number of transmission attempts of a frame whose size is less than or equal to
the RTS threshold.
• RTS threshold—Determines the data packet size at which the wireless LAN access point issues a request to send before
sending the packet.
• TX power level—Specify the power level used when transmitting data.
To use the original factory settings, press Restore defaults.
Control panel
Copyright © 2004 Nokia. All Rights Reserved. 63