User Manual

5. If the other device requires pairing before data can
be transmitted, you are asked to enter a passcode.
Create your own passcode (1-16 characters long,
numeric), and agree with the owner of the other
Bluetooth device to use the same code. The
passcode is used only once, and you do not have to
memorize it. Devices that do not have a user
interface have a preset passcode. After pairing, the
device is saved to the Paired devices page.
6. When the connection has been established
successfully, the note Sending… is shown.
Receiving data with Bluetooth
If you want to receive data using Bluetooth, set
Bluetooth to be active and selected the option Shown
to all.
When you receive data with Bluetooth from a device
that is not authorized, you are first asked if you want to
accept the Bluetooth message. If you accept, the item is
placed in the Inbox folder in the Messaging application.
Pairing with a device
Pairing means authentication. Pairing with a device
makes device searches quicker and easier.
Go to Desk → Tools → Control panel, and select
Connections → Bluetooth.
To pair with a device, select the Paired devices page.
Press New, then Start to start a device search. Select
the device you want to pair with, and press Pair. Enter
the passcode, and press OK.
Tip: The users of the devices using Bluetooth
technology should agree together on the
passcode, and use the same passcode for both
devices in order to pair them. Devices that do
not have a user interface have a preset
passcode.
To cancel pairing, select the Paired devices page.
Select the device whose pairing you want to cancel, and
press Delete.
To assign a short name for a paired device, select the
Paired devices page. Select the device whose name
you want to change, and press Edit. In the Assign
short name field, you can define a short name
(nickname, alias) to help you recognize a certain device.
This name is stored in the device memory and cannot
be seen by other Bluetooth device users.
To set a device to be authorized or unauthorized, select
the Paired devices page. Select the device, and press
Edit. Move to the Device authorised field, and select
Yes. Connections between your device and the other
device can be made without your knowledge. No
separate acceptance or authorization is needed. Select
Yes for your own devices, for example, your PC, or
devices that belong to someone you trust. The icon
is added next to authorized devices in the list of
paired devices. If you select No, connection requests
from this device need to be accepted separately every
time.
To connect to a Bluetooth device, select the Paired
devices page. Select the device from the list, press Edit,
and press Connect. Note that this option is available
only with audio devices that require a more stable
Bluetooth connection, for example, Bluetooth headsets
103
Connectivity
file:///C:/USERS/MODEServer/rapi/7167389/rae-6_mini/en/issue_1/rae-6_mini_en_1.xml Page 103 Nov 22, 2004 2:59:20 PMfile:///C:/USERS/MODEServer/rapi/7167389/rae-6_mini/en/issue_1/rae-6_mini_en_1.xml Page 103 Nov 22, 2004 2:59:20 PM