User Manual

See www.nokia.com and the User's Guide for Nokia PC
Suite for details.
To connect the device to a compatible computer using
an infrared connection, press Activate. To disconnect,
press Disable.
Tip: To use the device as a modem using a
Bluetooth or cable connection, you must
connect the device to a compatible computer,
and activate the modem from the computer.
Note that you may not be able to use some of the other
communication features when the device is used as a
modem.
Printing
You can print files to compatible printers in most
applications. Before starting to print, make sure that
your device is properly connected to the printer.
To print a file to a compatible printer, press Menu, and
select File → Printing → Print…. Check that the
settings are correct, and press Print.
To change the printing settings, press Options.
To preview a file before printing, press Menu, select
File → Printing → Print…, and press Preview. To
start printing to a compatible printer, press Print. To
modify the document size, margins, headers, footers or
pagination, press Page setup.
Problems with printing
Your device shows a note if you cannot connect the
device to a compatible printer.
Here are some starting points for troubleshooting:
• Printer - check that the printer is switched on and
online, print a test page, try to print while directly
connected to the printer, verify that the printer
works with other wireless devices, or check that the
printer is supported by your device.
• Infrared - check that infrared is activated, the
infrared ports of the device and the printer face each
other, and there are no bright lights shining on
either port.
• Bluetooth - check that Bluetooth is activated and
your device can locate Bluetooth devices other than
the printer, and the device and printer are within
range.
Managing mobile printing
settings
To manage the printing settings when printing to a
compatible Hewlett-Packard printer, go to Desk →
Tools → Control panel → Extras → HP printer
selection. Set the following:
• Printer model—Select the printer you want to use.
• Quality mode—Select the quality of the print,
depending on the printing qualities supported by
your printer. Normal is for 600 dpi printing, Draft is
for fast, 300 dpi printing, Best is for 1200 dpi
printing, and Maximum is for 2400/4800 dpi
105
Connectivity
file:///C:/USERS/MODEServer/rapi/7167389/rae-6_mini/en/issue_1/rae-6_mini_en_1.xml Page 105 Nov 22, 2004 2:59:20 PMfile:///C:/USERS/MODEServer/rapi/7167389/rae-6_mini/en/issue_1/rae-6_mini_en_1.xml Page 105 Nov 22, 2004 2:59:20 PM