User Manual

select an e-mail account and be online before you can
change the connection, and that the connection is
changed only for that account.
You are asked for confirmation if your current
connection becomes unavailable, if you have not set
the device to change connection automatically. See E-
mail account settings on page 39.
To use another connection, scroll to the connection you
want to use, and press Change.
To go online after selecting a new connection, press
Connect.
Writing and sending e-mail
Press Write message, select E-mail, and press OK.
To write new e-mail, press Recipient. Select the
recipient of the message from the Contacts directory,
and press To. Enter a subject and the message, and
press Send. You can also enter the recipient's e-mail
address in the To: field. Note that e-mail addresses
cannot contain accented characters such as Å, Ä, or É.
Tip: If you select the primary recipient of the e-
mail from the Contacts directory, you can also
select other recipients using the Cc (the
recipient is shown to all other recipients) and
Bcc (the recipient is hidden from all other
recipients) buttons.
To set the sending time or adjust other delivery
settings, press Menu, and select Tools → Sending
options….
You can send documents, images, and other files as e-
mail attachments.
To attach a file to an e-mail, press Insert file.
Tip: All e-mail is stored in the Outbox before
sending. Unless your e-mail is sent
immediately, you can open the Outbox and
suspend and resume sending or open the e-
mail.
To store the e-mail in the Drafts folder without sending
it, press Close.
Start writing or editing a message, press Menu, and
select Tools → Preferences….
To change the font type or size of the text, select the
appropriate field, and press Change. Select the new
font type or font size, and press OK.
Sending options
To define sending options for the e-mail you are
writing, press Menu, and select Tools → Sending
options….
Select the Message page.
To set the importance of your e-mail, select Priority,
and press Change.
To define the e-mail type , select Message type, and
press Change.
Select from these options:
• Plain text (no MIME)—Select when the receiving e-
mail system cannot display messages sent in the
regular Internet e-mail format, MIME.
37
Messaging
file:///C:/USERS/MODEServer/rapi/7167389/rae-6_mini/en/issue_1/rae-6_mini_en_1.xml Page 37 Nov 22, 2004 2:59:20 PMfile:///C:/USERS/MODEServer/rapi/7167389/rae-6_mini/en/issue_1/rae-6_mini_en_1.xml Page 37 Nov 22, 2004 2:59:20 PM