User Manual

Control panel
In Control panel, you can define and modify various
settings of your device. Modifying these settings affects
the operation of your device across several applications.
Go to Desk → Tools → Control panel.
Control panel, main view
To open an application in Control panel, select one of
the folders in the left frame, then the appropriate item
in the right frame.
To zoom in on the Control panel view, press Menu, and
select View → Zoom in.
General
Go to Desk → Tools → Control panel → General.
Date and time
You can change the time and date used by applications
such as Calendar and Clock.
To set the current time and date, select General →
Date and time, select the Time and Date fields, and
enter the numbers. When setting the date, you can also
press Browse to open a month grid where you can
select a date.
To update date and time automatically, select General
→ Date and time. In the Auto time update field,
select On. The time, date, and time zone information is
updated to your device from the mobile phone network
(network service). If the time zone changes, the current
city also changes in the Clock application, and starting
and ending times of your calendar entries are shown in
local time. For the setting to take effect, the phone
needs to be restarted.
Tip: Check any alarms and scheduled calendar
entries, as these may be affected by Auto time
update.
To use daylight saving, select General → Date and
time. In the Daylight-saving field, select On to use the
system's daylight saving time. Note that you cannot
activate daylight saving if you have selected On in the
Auto time update field.
Tip: To change the time and date format, select
General → Regional settings. Modify the
settings on the Time and Date pages.
73
Control panel
file:///C:/USERS/MODEServer/rapi/7167389/rae-6_mini/en/issue_1/rae-6_mini_en_1.xml Page 73 Nov 22, 2004 2:59:20 PM