User Manual

• IP passthrough—Select this to connect your
device to a compatible PC and use the Internet or
network connection of the PC.
• IP pass. overr. PC Suite—Select this to
automatically terminate a PC Suite connection via
data cable when you connect your device to a
compatible PC and use the Internet or network
connection of the PC.
RealPlayer settings
To access streaming data, such as real-time audio and
video, you must set network and proxy settings for the
RealPlayer application.
To modify RealPlayer settings, select Connections →
RealPlayer settings.
On the Network and Proxy pages, define the following:
• Connection timeout:—Specify how long
RealPlayer waits before reporting a network
connection failure. Increase the time if you
frequently receive a time-out error.
• Server timeout:—Specify how long RealPlayer
waits for a response from the media server before
disconnecting.
• Port range:—Specify the port range that is used
for receiving data.
• Use proxy:—Select Yes, if your Internet service
provider requires that a proxy server is used to
connect to the Internet.
• Host address:—Enter the proxy server address.
• Port:—Enter the port number of the proxy server.
Security
Go to Desk → Tools → Control panel → Security.
Device security
You can modify the security settings for the PIN code,
automatic locking of the device, and changing of the
SIM card. You can also change the PIN code, PIN2 code,
lock code, and barring password.
Avoid using codes that are similar to emergency
numbers, such as 112, to prevent accidental dialling of
the emergency number.
Codes are shown as asterisks. When changing a code,
enter the current code, and then the new code twice.
Defining device lock settings
Important: In offline profile you cannot make
(or receive) any calls, or use other features that require
GSM network coverage. To make any calls, you must
first activate the phone function by changing the
profile. You may, however, be able to make an
emergency call in offline profile by pressing the power
key on the cover of the device and then entering the
official emergency number. This can be done using the
cover phone interface only, not the communicator
interface. If the device has been locked, enter the lock
code to activate the phone function. When the device is
locked, calls may still be possible to the official
emergency number.
81
Control panel
file:///C:/USERS/MODEServer/rapi/7167389/rae-6_mini/en/issue_1/rae-6_mini_en_1.xml Page 81 Nov 22, 2004 2:59:20 PMfile:///C:/USERS/MODEServer/rapi/7167389/rae-6_mini/en/issue_1/rae-6_mini_en_1.xml Page 81 Nov 22, 2004 2:59:20 PM