User Manual

IP configuration page
Note that the two protocols (IPv4 and IPv6) require
slightly different settings.
• Network type (for GPRS only)—For a GPRS
connection you must specify which protocol you
want to use.
• Auto retrieve IP—If you select Yes, the IP address
is obtained automatically from the server. This
setting is also called dynamic IP address.
• IP address—The IP address of the device. If the IP
address is obtained automatically, you are not
required to enter details here.
• Auto retrieve DNS—If you select Yes for the IPv4
protocol, the DNS (domain name server) address is
obtained automatically from the server. The
respective value for the IPv6 protocol is Well
known. DNS is an Internet service that translates
domain names such as www.nokia.com into IPv4
addresses like 192.100.124.195, or IPv6 addresses
like 3ffe:2650:a640:1c2:341:c39:14. If you select No
for the IPv4 protocol, or Manual for the IPv6
protocol, you must specify the IP addresses for the
primary and secondary DNS servers.
Proxies page
You may want to use a proxy to quicken access to the
Internet. Some Internet service providers require the
use of Web proxies. Contact your Internet service
provider to determine proxy details.
If you have made an Internet connection to your
company’s intranet, and are unable to retrieve Web
pages from the general Internet, you may need to set
up a proxy server to retrieve Web pages outside your
company’s intranet.
Define the following:
• Proxy protocol—Select the protocol type of the
proxy. You can set different proxy settings for each
protocol.
• Use proxy server—Select Yes to use the proxy
server.
• Proxy server—Enter the IP address of the proxy
server, or the domain name. Example domain names
are: company.com and organisation.org.
• Port number—The number of the proxy port. The
port number is related to the protocol. Common
values are 8000 and 8080, but vary with every proxy
server.
• No proxy for—Define the domains for which the
HTTP or HTTPS proxy is not needed.
Data call page
Define the following:
• Connection type—Define the GSM data call type.
To use High speed, the service provider must
support this feature, and if necessary, activate it for
your SIM card.
• Remote modem type—Define whether the device
uses an analog or digital connection. This setting
depends on both your GSM network operator and
Internet service provider, because some GSM
networks do not support certain types of ISDN
connections. For details, contact your Internet
service provider. If ISDN connections are available,
86
Control panel
file:///C:/USERS/MODEServer/rapi/7167389/rae-6_mini/en/issue_1/rae-6_mini_en_1.xml Page 86 Nov 22, 2004 2:59:20 PMfile:///C:/USERS/MODEServer/rapi/7167389/rae-6_mini/en/issue_1/rae-6_mini_en_1.xml Page 86 Nov 22, 2004 2:59:20 PM