User Manual

Clock
In Clock, you can view the date and time of your home
and destination city, and manage clock alarms.
Go to Desk → Clock.
Using world clock
To set the date and time, press Menu, and select Tools
→ Date and time….
Tip: You can also update date and time
automatically (network service). You can select
this setting in Control panel. See Date and time
on page 73.
To switch between the home and destination city
information, press the tab key.
To change a city, select either the home or destination
city, and press Change city.
Tip: If you change the home city, the clock and
calendar entries are updated. This is useful for
example when you want to attend phone
conferences.
To view and manage alarms, press Alarm clock.
To change the clock type, press Menu, and select View
→ Clock type, and select Analog or Digital.
Tip: To change to the one-clock view which
shows only your home city information, press
Menu, and select View → Remote city details.
Using Alarm clock
If the alarm time is reached while the device is
switched off, the device switches itself on and starts
sounding the alarm tone. If you press Stop/Stop, the
device asks whether you want to activate the device for
calls. Press No to switch off the device or Yes to make
and receive calls. Do not press Yes when wireless
phone use may cause interference or danger.
To set an alarm, press New alarm, and enter the alarm
time.
To modify an alarm, press Edit alarm.
To remove an alarm, press the backspace key.
When the alarm sounds, press Stop to turn it off. Press
Snooze to postpone the alarm.
95
Clock
file:///C:/USERS/MODEServer/rapi/7167389/rae-6_mini/en/issue_1/rae-6_mini_en_1.xml Page 95 Nov 22, 2004 2:59:20 PM