User Manual

Data and software management
Your smartphone offers you several applications for
managing your personal data, such as contacts and
calendar information and e-mail.
Data mover
You can use Data mover to transfer certain data, such
as contacts and settings, from your Nokia 9200 series
Communicator to your Nokia 9300 with infrared or a
memory card. Before you start, make sure that there is
enough free memory in your devices or memory card
for the transfer. Note that if there is less than 2 MB of
free memory in the Nokia 9300 , you cannot start the
transfer.
Do not use the Nokia 9300 when using Data mover. If
possible, switch off the cover phone. Make sure you
have enough battery power, or connect the device to a
charger.
Note: Before you use an existing compatible
memory card with your Nokia 9300, you must convert
the memory card with Data mover and reinstall the
applications that you previously installed to the
memory card. However, do not reinstall any pre-
installed applications for the Nokia 9210
Communicator. Your Nokia 9300 contains a later
version of these applications, and these later versions
must be used with Nokia 9300.
Note that there may be additional steps, depending on
the type of information that you want to transfer, the
method of transfer you want to use, the amount of free
memory on your previous communicator or memory
card, or the number of successful or unsuccessful
transfers you have made previously. Make sure that the
infrared ports of the devices are facing each other.
1. Go to Desk → Tools → Data mover. If there is
data on a memory card, insert it to your Nokia 9200
series Communicator. Press Continue transfer.
2. Activate infrared in both devices, make sure that the
infrared ports of the devices are facing each other,
and press Continue. An infrared connection is
established between the devices.
3. Press Send data collector to send the Data
collector to your Nokia 9200 series Communicator.
Data collector is sent as an infrared message to your
Inbox. To install Data collector, press Open in the
9200 series Communicator. If Open is not available,
press Save to save the installation file, and open it
from File manager. The Data collector starts
automatically after installation. If you have already
installed the tool , press Connect data coll. in your
Nokia 9300.
4. Select the data you want to transfer in the Nokia
9300. You can transfer calendar and contact
information, messages, settings, documents, and
images. Some files, such as business card messages
96
Data and software management
file:///C:/USERS/MODEServer/rapi/7167389/rae-6_mini/en/issue_1/rae-6_mini_en_1.xml Page 96 Nov 22, 2004 2:59:20 PM