User's Guide

Settings (Menu 4)

Data communication applications

For information on using a data communication application, refer to the

documentation provided with the application.

If you use an IR connection, activate the IR connection in your phone by selecting

Settings > Connectivity > Infrared from the menus. Also, make sure that the

connection is active in your PC.

For better performance during an IR connection, place the phone on a stationary

surface. Do not move the phone while the IR connection is active.

If you use the DKU-2 data cable:

1 Connect the cable to the USB port on your computer and to the Pop-Port™

connector on your phone.

2 Start using the data communications application on the computer.

Note: Making or answering phone calls during a computer connection is

not recommended as it might disrupt the operation.

• CALL SETTINGS

Automatic volume control

Automatic volume control automatically adjusts the phone earpiece volume

according to the noise level in your environment and the volume of the speaker on

the other end of the call. For example, if you are in a noisy environment, the volume

is increased. If the person to whom you are speaking is speaking loudly, the volume

is decreased.

Automatic volume control is not available if you are using a headset or other

accessory.

FROM THE MENU

1 From the menus, select Settings > Call settings > Automatic volume control.

2 Select On to activate or Off to deactivate.

The default setting is Off.

DURING A CALL

Note: Setting automatic volume control during an active call affects only

the current call.

1 During a call, select Options.

2 Select Auto volume on to activate or Auto volume off to deactivate.

6230.ENv1_9310059.book Page 89 Friday, January 30, 2004 2:33 PM