User's Guide

DRAFT
Your Nokia NXX
12
• To mark multiple items in a list, press and hold
while you press or . To end the selection, release
, then release .
• To copy and paste text: To select letters and words,
press and hold . At the same time, press or
to highlight text. To copy the text to clipboard, while
still holding , select Copy. To insert the text into a
document, press and hold , and select Paste.
Settings
Your Nokia NXX normally has MMS, GPRS, streaming, and
mobile Internet settings automatically configured in the
device, based upon your service provider or network
operator information. You may have settings from your
service providers already installed in your device, or you
may receive the settings from the service providers as a
special text message.
Transfer content from
another device
You can copy content such as contacts and calendar
entries from a compatible Nokia phone to your Nokia NXX
using Bluetooth connectivity or infrared. The type of
content that can be copied depends on the phone model.
Copyright protections may prevent some images, music
(including ringing tones), and other content from being
copied, modified, transferred or forwarded.
You can insert your SIM card in the other device. When
your Nokia NXX is switched on without a SIM card, the
offline profile is automatically activated.
Transfer content
1 Press , and select Tools > Transfer on your Nokia
NXX.
2 In the information view, select Continue.
3 Select whether you want to use Bluetooth connectivity
or infrared to transfer the data. Both devices must
support the selected connection type.
4 If you select Bluetooth connectivity, to have your Nokia
NXX search for devices with Bluetooth connectivity,
select Continue. Select your other device from the list.
You are asked to enter a passcode on your Nokia NXX.
Enter a code (1-16 digits), and select OK. Enter the
same code on the other device, and select OK. The
devices are now paired. See ‘Pair devices’, p. 80.
For some phone models, the Transfer application is
sent to the other device as a message. To install
Transfer on the other device, open the message, and
follow the instructions on the display.
If you select infrared, connect the two devices. See
‘Infrared connection’, p. 81.