User Manual

E-mail messages are stored in the Outbox before
sending. Unless the e-mail is sent immediately, you can
open the Outbox and suspend and resume sending or
view the e-mail.
E-mail account settings
Select Menu > Messag. > Options > Settings > E-mail.
The settings available for editing may vary. Some
settings may be preset by your service provider.
If you try to edit mailbox settings but have not set up
an e-mail account, the mailbox guide opens and helps
you set up your e-mail account.
Settings for the received e-mail
Select Incoming e-mail and from the following settings:
• User name — Enter the user name for the e-mail
service.
• Password — Enter the password for the e-mail
service.
• Incoming mail serv. — Enter the IP address or host
name of the server that receives your e-mail.
• Access point in use — Select the Internet access point
that the device uses for retrieving the e-mail
messages that you receive.
• Default mailbox — Enter a name for the mailbox.
• Mailbox type — Select the mailbox protocol that your
remote mailbox service provider recommends. The
options are POP3 and IMAP4. This setting can be
selected only once and cannot be changed if you
have saved or exited from the mailbox settings. If
you use the POP3 protocol, e-mail messages are not
updated automatically when you are online. To see
the latest e-mail messages, you must disconnect and
make a new connection to your mailbox.
• Security (ports) — Select the security option used to
increase the security of the connection.
• Port — Define a port for connection.
• APOP secure login (for POP3 only) — Use with the
POP3 protocol to encrypt the sending of passwords
to the remote e-mail server while connecting to the
mailbox.
Settings for sent e-mail
Select Outgoing e-mail and from the following settings:
• My e-mail address — Enter the e-mail address given
to you by your service provider. Replies to your
messages are sent to this address.
• User name — Enter the user name for the e-mail
service.
• Password — Enter the password for the e-mail
service.
• Outgoing mail serv. — Enter the IP address or host
name of the mail server that sends your e-mail. You
may only be able to use the outgoing server of your
network operator. Contact your service provider for
more information.
• Access point in use — Select the Internet access point
that the device uses for sending the e-mail messages
that you send.
• Security (ports) — Select the security option used to
secure the connection to the remote mailbox.
• Port — Define a port for connection.
User settings
Select User settings and from the following settings:
41
Messages
file:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 41 Jun 26, 2006 9:34:16 AMfile:///C:/USERS/MODEServer/lkatajis/30533386/rm-170_siperia/en/issue_1/rm-170_siperia_en-US_1.xml Page 41 Jun 26, 2006 9:34:16 AM