User Manual

Contacts
50
Create a caller group
You can create a new caller group and store a list of contacts in the group.
Select Contacts > Groups > Options > Add new group; enter the name of the new
group, and select OK.
Add a contact to a caller group
1. In the standby mode, scroll down to display your list of contacts.
2. Scroll to a contact, select Details.
3. Scroll to a number, and select Options > Add to group and the existing caller
group to which you wish to add the number.
Modify a caller group
Select Menu > Contacts > Groups > Options > Group details and one of the
following options:
Group name—Rename the group to your preference.
Group ringing tone—Set the ringing tone for the group.
Group image—Turn the graphic for the caller group on or off.
Group members—Add or remove members from the caller group.
■ Set up voice tags
Before using voice tags, note the following:
• Voice tags are not language-dependent. They are dependent on the speaker's
voice.
• You must say the name exactly as you said it when you recorded it.
• Voice tags are sensitive to background noise. Record voice tags, and use them
in a quiet environment.
• Very short names are not accepted. Use long names, and avoid similar names
for different numbers.
Note: Using voice tags may be difficult in a noisy environment or during
an emergency, so you should not rely solely upon voice dialing in all
circumstances.