User Manual

AFT

7. Slide the back cover into place.

■ Insert a microSD card

1. Open the memory card holder as shown.

2. Insert the card into the microSD card slot

with the gold-colored contact area on the

card facing upwards, and press it until it

clicks into place.

3. Close the memory card holder.

A memory card is not included in the sales pack.

Important: Do not remove the memory card in the middle of an operation when

the card is being accessed. Removing the card in the middle of an operation may

damage the memory card as well as the device, and data stored on the card may

be corrupted.

■ Remove the microSD card

You can remove or replace the microSD card during phone operation without switching the

phone off.

1. Make sure that no application is currently accessing the micro SD memory card.

2. Open the memory card holder.

3. Press the microSD card slightly in to release the locking.

4. Remove the microSD card from the slot.

■ Charge the battery

Check the model number of any charger before use with this device. This device is intended

for use when supplied with power from an AC-3, AC-4, AC-5, or CA-70 charger.