User Manual

D
R
AFT
20
Call waiting
To answer the waiting call during an active call, press the call key. The first call is put on
hold. To end the active call, press the end key.
To activate the Call waiting function, see “Call,” p. 50.
Options during a voice call
Many of the options that you can use during a call are network services. For availability,
contact your service provider.
During a call, select Options and from the following:
Call options are Mute or Unmute, Phonebook, Menu, Lock keypad, Record or Loudspeaker.
Network services options are Answer or Decline, Hold or Resume, New call, Add to
conference, End call, End all calls, and the following:
Touch tones — to send tone strings
Swap — to switch between the active call and the call on hold
Transfer calls — to connect a call on hold to an active call and disconnect yourself
Conference — to make a conference call
Private call —to discuss privately in a conference call
Warning: Do not hold the device near your ear when the loudspeaker is in use,
because the volume may be extremely loud.
Make a video call
During operation, for example, during an active video call or highspeed data connection, this
device may at times feel warm. In most cases, this is normal, not a fault. If you suspect the
device is not working properly, take it to the nearest authorized service facility for service.
When you make a video call, you send a real-time video to the recipient of the call. The video
image captured by the VGA camera above the main display, is shown to the video call
recipient.
To be able to make a video call, you must have a USIM card and be connected in a WCDMA
network. For availability of and subscription to video call services, contact your service
provider. A video call can only be made between two parties. The video call can be made to a
compatible phone or an ISDN client. Video calls cannot be made while another voice, video,
or data call is active.
1. To start a video call, enter the phone number in the standby mode, or select Phonebook
and a contact.
2. Press and hold the call key, or select Options > Video call.