User Manual

AFT

Packet data connection (GPRS)

General packet radio service (GPRS) is a network service that allows mobile phones to send

and receive data over an internet protocol (IP)-based network.

To define how to use the service, select Menu > Settings > Connectivity > Packet data >

Packet data conn. and from the following options:

When needed — to set the packet data connection to established when an application needs

it. The connection will be closed when the application is ended.

Always online — to set the phone to automatically connect to a packet data network when

you switch the phone on

Modem settings

You can connect the phone using Bluetooth wireless technology or USB data cable

connection to a compatible PC and use the phone as a modem to enable GPRS connectivity

from the PC.

To define the settings for connections from your PC, select Menu > Settings >

Connectivity > Packet data > Packet data settings > Active access point, and activate the

access point you want to use. Select Edit active access pt. > Packet data acc. pt., enter a

name to change the access point settings, and select OK. Select Packet data acc. pt., enter

the access point name (APN) to establish a connection to a network, and select OK.

Establish an internet connection by using your phone as a modem. See “Nokia PC Suite,”

p. 62. If you have set the settings both on your PC and on your phone, the PC settings are

used.

Data transfer

Synchronize your calendar, contacts data, and notes with another compatible device (for

example, a mobile phone), a compatible PC, or a remote internet server (network service).

Your phone allows data transfer with a compatible PC or another compatible device when

using the phone without a SIM card.

Transfer contact list

To copy or synchronize data from your phone, the name of the device and the settings must

be in the list of transfer contacts. If you receive data from another device (for example, a

compatible mobile phone), the corresponding transfer contact is automatically added to the

list, using the contact data from the other device. Server sync and PC synchronization are

the original items in the list.

To add a new transfer contact to the list (for example, a mobile phone), select Menu >

Settings > Connectivity > Data transfer > Options > Add transfer contact > Phone sync or

Phone copy, and enter the settings according to the transfer type.