User's Manual

Personalize your device
101
To change the 3–D effect that is applied to the ringing
tone, select Sound trajectory and the desired effect. To
modify the effect, select from the following settings:
Trajectory speed—Scroll left or right to adjust the speed at
which sound moves from one direction to another. This
setting is not available for all ringing tones.
Reverberation—Select the type of echo.
Doppler effect—Select On to have the ringing tone sound
higher when you are closer to your device, and lower when
you are farther away. When you get closer to the device,
the ringing tone seems to become higher, and lower when
you move away from it. The Doppler effect is not available
for all sound trajectories.
To listen to the ringing tone with the 3–D effect, select
Options > Play tone.
If you enable the 3-D tones but do not select any 3-D
effect, stereo widening is applied to the ringing tone.
To adjust the ringing tone volume, select Tools >
Profiles > Options > Personalise > Ringing volume.
Change the look of your
device
To change the look of the display, such as the wallpaper
and icons, press , and select Tools > Settings >
General > Personalisation > Themes.
To change the theme that is used for all the applications
in your device, select Themes > General.
To preview a theme before activating it, select Options >
Preview. To activate the theme, select Options > Set. The
active theme is indicated by .
The themes on the memory card are indicated by .
To change the layout of the main menu, select Themes >
Menu view.
To open a browser connection and download more
themes, in General or Menu view, select Download
themes (network service).
Important: Use only services that you trust and that
offer adequate security and protection against harmful
software.
To edit the wallpaper, select Themes > Wallpaper to
change the background image on the display for the active
standby mode.
P2954_en.book Page 101 Tuesday, July 3, 2007 2:51 PM