User's Manual

Make calls
111
Your service provider may send you the settings over the
air or give you a list of the needed parameters.
If you know a recipient’s SIP address, you can enter it on
the person’s contact card. Press , select Contacts, and
open the contact card (or start a new card for that person).
Select Options > Add detail > SIP or Share view. Enter the
SIP address in the format username@domainname (you
can use an IP address instead of a domain name).
If you do not know a SIP address for the contact, you can
also use the phone number of the recipient including the
country code, for example +358, to share video (if
supported by the network service provider).
UMTS connection settings
To set up your UMTS connection, do the following:
• Contact your service provider to establish an
agreement for you to use the UMTS network.
• Ensure that your UMTS access point connection
settings are configured properly. For help, see
‘Connection’, p. 124.
Share live video or video clip
1 When a voice call is active, select Options > Share
video > Live video, and open the lens cover in the back.
To share a video clip, select Options > Share video >
Recorded clip. A list of video clips saved in the device
opens. Select a clip you want to share. To preview the
clip, select Options > Play.
2 If you share live video, your device sends the invitation
to the SIP address you have added to the contact card
of the recipient.
If you share a video clip, select Options > Invite. You
may need to convert the video clip into a suitable
format to be able to share it. Clip must be converted
for sharing. Continue? is displayed. Select OK.
If the contact information of the recipient is saved in
Contacts, and the contact has several SIP addresses or
phone numbers including the country code, select the
desired address or number. If the SIP address or phone
number of the recipient is not available, enter the SIP
address or the phone number of the recipient including
the country code, and select OK to send the invitation.
3 Sharing begins automatically when the recipient
accepts the invitation.
4 Select Pause to pause the sharing session. Select
Continue to resume sharing. To fast forward or rewind
the video clip, press or . To play the clip again,
select Play.
5 To end the sharing session, select Stop. To end the
voice call, press the end key. Video sharing also ends if
the active voice call ends.
P2954_en.book Page 111 Tuesday, July 3, 2007 2:51 PM