User Manual

• Access codes — to change the security code, PIN code, UPIN code, PIN2 code,
or barring password
to change the security code, PIN code, UPIN code, PIN2 code, or restriction
password
• Code in use — to select whether the PIN code or UPIN code should be active
• Authority certificates or User certificates — to view the list of the
authority or user certificates downloaded into your device. See
"Certificates," p. 88.
• Security module settings — to view Security module details, activate
Module PIN request, or change the module PIN and signing PIN. See "Access
codes," p. 11.
Software updates over the air
Warning: If you install a software update, you cannot use the device,
even to make emergency calls, until the installation is completed and
the device is restarted. Be sure to back up data before accepting
installation of an update.
Your service provider may send device software updates over the air directly
to your device (network service). This option may not be available, depending
on your device.
Software update settings
To allow or disallow software updates, select Menu > Settings >
Configuration > Device manager settings > Service provider software
updates and the following options:
• Always allow — to perform all software downloads and updates
automatically
• Always reject — to reject all software updates
• Confirm first — to perform software downloads and updates only after your
confirmation (default setting)
Settings
62
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
file:/D:/temp/overmode/GUID-1AFD4F23-530A-4232-B1A2-AD8C3D7641D3.en.200703141510500741173878171418/en/1/GUID-E9B10502-9BEE-452E-
A2EB-4A477D49C6EB.xml Page 62 Mar 14, 2007 3:16:59 PM