User's Guide

If you move the device to another location within the
WLAN and out of range of a WLAN access point, the
roaming functionality can automatically connect your
device to another access point that belongs to the same
WLAN. As long as you remain within range of access points
that belong to the same network, your device can stay
connected to the network.
Tip: To check the unique media access control (MAC)
address that identifies your device, for example to
configure the MAC address of your device to a WLAN
router, enter *#62209526# on the device keypad.
The MAC address is shown on the device display.
See WLAN availability
To have your device show WLAN availability, select
Menu > Tools > Settings > Connection > Wireless
LAN > Show WLAN availability.
If WLAN is available,
is shown on the display.
Tip: You can also scan for networks in range.
WLAN wizard
Select Menu > Connectivity > WLAN wiz..
The WLAN wizard helps you find and connect to a wireless
LAN. When you open the application, your device starts to
scan for available WLANs and lists them.
To update the list of available WLANs, select Options >
Refresh.
To start or continue browsing the web using the access
point of the WLAN, scroll to the desired network, and select
Options > Start Web browsing or Cont. Web
browsing.
To disconnect the active connection to the WLAN, select
Options > Disconnect WLAN.
To view the details of the WLAN, select Options >
Details.
To save the access point of the WLAN, select Options >
Define access point.
Always enable one of the available encryption methods to
increase the security of your WLAN connection. Using
encryption reduces the risk of unauthorised access to your
data.
Use the wizard in the active standby mode
In the active standby mode, the WLAN wizard shows the
status of your WLAN connections and network searches.
To view the available options, scroll to the row showing
the status, and press the scroll key. Depending on the
status, you can start the Web browser using a WLAN
connection, disconnect from a WLAN, search for WLANs, or
set the network scanning on or off.
If WLAN scanning is off and you are not connected to any
WLAN, WLAN scanning off is displayed in the active
standby mode. To set scanning on and search for available
WLANs, scroll to the row showing the status, and press the
scroll key.
53
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black