User's Guide

4. After defining the settings, select Options >
Advanced settings to define the advanced settings or
Back to save the settings and exit.
Set up an access point for
WLAN manually
1. Select Menu > Tools > Settings > Connection >
Access points.
2. Select Options > New access point to create a new
access point, or select an existing access point from the
list and then Options > Duplicate access point to use
the access point as a basis for the new one.
3. Define the following settings.
• Connection name — Enter a descriptive name for
the connection.
• Data bearer — Select Wireless LAN.
• WLAN network name — To enter the service set
identifier (SSID), that is, the name that identifies the
specific WLAN, select Enter manually. To select the
network from the WLANs in range, select Search for
networks.
• Network status — Select Hidden if the network
you are connecting to is hidden or Public if it is not
hidden.
• WLAN network mode — If you select
Infrastructure, devices can communicate with
each other and with wired LAN devices through a
WLAN access point. If you select Ad-hoc, devices can
send and receive data directly with each other, and
no WLAN access point is needed.
• WLAN security mode — You must select the same
security mode that is used in the WLAN access point.
If you select WEP (wired equivalent privacy), 802.1x,
or WPA/WPA2 (Wi-Fi protected access), you must
also configure the relevant additional settings. See
the device help for more information.
• WLAN security settings — Edit the security
settings for the selected security mode.
• Homepage — Enter the web address of the page
you want to display as the home page when you use
this access point.
To set up a WLAN access point automatically, use the WLAN
wizard. Select Menu > Connectivity > WLAN wiz..
Modem
Select Menu > Connectivity > Modem.
Together with a compatible computer, you can use your
device as a modem to connect to the web, for example.
Before you can use your device as a modem
• You need an appropriate data communications
software on your computer, such as Nokia PC Suite. For
more information, see the Nokia PC Suite guide.
• You must subscribe to the appropriate network services
from your service provider or internet service provider.
• You must have the appropriate drivers installed on your
computer. You must install drivers for the cable
connection, and you may need to install or update
Bluetooth or infrared drivers.
To connect the device to a compatible computer using
infrared, press the scroll key. Make sure the infrared ports
55
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black